ATPAZDB
ATPAZDB LQ156D1JW37 15.6" UHD 4K 3840x2160 IPS 40-pin laptop screen
A 15.6-inch UHD 4K IPS replacement panel with 3840x2160 resolution, 350 cd/m² brightness, 1000:1 contrast, 60 Hz refresh and a 40-pin connector
- Compatible ModelsLQ156D1JW37
- Screen Size15.6 inch
- Screen ResolutionUHD 4K 3840x2160
- Sharp 4K UHD detail from 3840x2160 resolution
- Consistent colour at wide angles via IPS panel
- Bright 350 cd/m² output for clear indoor viewing
- 1000:1 contrast adds depth to dark scenes
- 40-pin connector matches LQ156D1JW37 exactly
15.6" UHD 4K IPS Replacement Panel
This new 15.6-inch IPS display delivers a UHD 4K resolution of 3840x2160 at 60Hz. It connects via a 40-pin video signal connector and offers 350 cd/m² brightness with a 1000:1 contrast ratio. The panel is a non-touch model designed specifically as a direct replacement for the LQ156D1JW37 part number.
Compatibility And Use Case
This screen suits owners of a laptop requiring the exact LQ156D1JW37 panel with a 40-pin interface and 60Hz refresh rate. It is not for buyers who need a touchscreen layer, a different pin count, or a higher refresh rate than 60Hz.
40-Pin Connector And 60Hz Refresh
The single specification that decides fit is the 40-pin video connector combined with the 60Hz refresh timing. Verify the original screen uses this exact pin layout and signal timing before ordering.
Highlights
- Sharp 4K UHD detail from 3840x2160 resolution
- Consistent colour at wide angles via IPS panel
- Bright 350 cd/m² output for clear indoor viewing
- 1000:1 contrast adds depth to dark scenes
- 40-pin connector matches LQ156D1JW37 exactly
Specifications
| Part Number | LQ156D1JW37 |
|---|---|
| Compatible Models | LQ156D1JW37 |
| Screen Size | 15.6 inch |
| Screen Resolution | UHD 4K 3840x2160 |
Questions about this item
Will my laptop need a 40-pin eDP cable to connect this LQ156D1JW37 panel?
Yes, the panel uses a 40-pin video signal connector, so the host laptop must provide a matching 40-pin eDP cable.
Can I keep my existing 60 Hz display cable when swapping to this 60 Hz UHD screen?
The panel runs at 60 Hz; if your current cable supports that refresh rate at 3840×2160 it will work, otherwise a cable rated for 4K 60 Hz is required.
How can I verify the screen is delivering its rated 350 cd/m² brightness and 1000:1 contrast after installation?
Display a full-white pattern and measure luminance with a calibrator; it should read near 350 cd/m², and a checkerboard pattern should yield a 1000:1 contrast ratio.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



