ATPAZDB
ATPAZDB LQ133M1JW31 laptop screen 13.3" FHD 1920x1080 30-pin 60Hz
A 13.3 inch Full HD 1920x1080 laptop replacement screen with 30-pin connector and 60Hz refresh rate
- Compatible ModelsLQ133M1JW31
- Screen Size13.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp Full HD detail on a 13.3 inch panel
- 300 cd/m² brightness for clear indoor viewing
- 1000:1 contrast ratio adds depth to images
- 60 Hz refresh rate handles everyday motion
- 30-pin connector fits LQ133M1JW31 models
Replacement screen details
The ATPAZDB LQ133M1JW31 is a 13.3 inch laptop replacement panel with a 30-pin video connector. It delivers Full HD 1920x1080 resolution at 60Hz refresh rate. The matte finish suits everyday office work and media viewing. Brightness reaches 300 cd/m² with a 1000:1 contrast ratio.
Ideal use cases
This panel fits laptops that require the exact LQ133M1JW31 part number and a 30-pin interface. It is not suitable for touchscreen models or higher refresh-rate requirements. Buyers needing a different connector pin count or screen size should look elsewhere.
Deciding specification
The 30-pin video signal connector determines compatibility with your device. Verify the original screen part number matches LQ133M1JW31 before ordering. An incorrect pin count will prevent installation.
Highlights
- Sharp Full HD detail on a 13.3 inch panel
- 300 cd/m² brightness for clear indoor viewing
- 1000:1 contrast ratio adds depth to images
- 60 Hz refresh rate handles everyday motion
- 30-pin connector fits LQ133M1JW31 models
Specifications
| Part Number | LQ133M1JW31 |
|---|---|
| Compatible Models | LQ133M1JW31 |
| Screen Size | 13.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
Does my laptop already use a 30-pin eDP connector for the LQ133M1JW31 panel?
Yes, this replacement screen uses a 30-pin video signal connector, so the host laptop must provide a matching 30-pin eDP interface for it to work.
Will the 60 Hz refresh rate of this panel match the timing of my existing 60 Hz display?
The panel operates at 60 Hz, so it will synchronize with any laptop that currently drives a 60 Hz 1920x1080 signal without requiring a refresh-rate change.
How can I confirm the 300 cd/m² brightness and 1000:1 contrast are correct after installation?
Display a full-white test pattern and measure luminance with a calibrator; it should read near 300 cd/m², and a black-level check should yield a contrast ratio close to 1000:1.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



