ATPAZDB
ATPAZDB LP173WF5 laptop screen 17.3 inch FHD 1920x1080 IPS 60Hz 30-pin
A 17.3 inch IPS panel delivers 1920 x 1080 resolution at 60 Hz with 250 cd/m² brightness, 800:1 contrast and a 30-pin connector
- Compatible ModelsLP173WF5(SP)(Z1)
- Screen Size17.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- 3 inch IPS panel gives wide viewing angles
- Full HD 1920x1080 resolution delivers sharp detail
- 60 Hz refresh rate suits everyday tasks
- 250 cd/m² brightness works well indoors
- 30-pin connector matches original LP173WF5 (SPZ1) fitting
Screen specification and purpose
This 17.3 inch IPS panel delivers a 1920x1080 resolution at 60 Hz with a 30-pin video connector. It is built as a direct replacement for laptops that originally used the LP173WF5 (SPZ1) part number. The 250 cd/m² brightness and 800:1 contrast ratio match the factory display characteristics for compatible models.
Fit and exclusions
The screen suits owners of notebooks requiring the exact LP173WF5(SP)(Z1) panel with a non-touch IPS surface. It will not fit machines that use a different connector pin count, a higher refresh rate, a touch-sensitive layer, or a 4K resolution panel.
Deciding specification
The 30-pin video signal connector is the single detail that determines whether this panel will install and function in your laptop. Verify the original screen uses the same 30-pin interface before ordering.
Highlights
- 3 inch IPS panel gives wide viewing angles
- Full HD 1920x1080 resolution delivers sharp detail
- 60 Hz refresh rate suits everyday tasks
- 250 cd/m² brightness works well indoors
- 30-pin connector matches original LP173WF5 (SPZ1) fitting
Specifications
| Part Number | LP173WF5(SP)(Z1) |
|---|---|
| Compatible Models | LP173WF5(SP)(Z1) |
| Screen Size | 17.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
Will the 30-pin connector on this LP173WF5 panel plug directly into the cable of my existing 17.3-inch laptop without an adapter?
The panel uses a 30-pin video signal connector. If your current screen also uses a 30-pin cable with the same pin layout, it will connect directly; otherwise an adapter or different cable is required.
After fitting the screen, how can I confirm the 1920x1080 IPS panel is running at its native 60 Hz refresh rate?
In Windows, open Display Settings, choose Advanced Display, and verify the resolution shows 1920 x 1080 and the refresh rate reads 60 Hz; the image should also appear sharp with consistent 250 cd/m² brightness and 800:1 contrast.
Does the box include only the bare LP173WF5 display panel, or are mounting brackets, bezel, and video cable also supplied?
The shipment contains the bare 17.3-inch IPS panel with 30-pin connector. Mounting brackets, bezel, hinges, and the video cable are not included and must be reused from the original screen or purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



