ATPAZDB
ATPAZDB LP173WF2 laptop screen 17.3" 1920x1080 60Hz 50-pin
17.3 inch Full HD 1920x1080 display panel with 60 Hz refresh rate, 50-pin connector, 400 cd/m² brightness and 500:1 contrast for compatible laptops
- Compatible ModelsLP173WF2(TP)(B2)
- Screen Size17.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Full HD clarity with 1920x1080 resolution
- Bright 400 cd/m² output for vivid visuals
- 500:1 contrast ratio delivers deeper blacks
- Standard 60Hz refresh for smooth motion
- 50-pin connector ensures direct compatibility
Product Identity
This ATPAZDB LP173WF2 is a 17.3 inch Full HD laptop replacement screen with a 1920x1080 resolution and a 60Hz refresh rate. It uses a 50-pin video signal connector and delivers 400 cd/m² brightness with a 500:1 contrast ratio. The panel is non-touch and built to match the LP173WF2(TP)(B2) part number exactly.
Who It Suits
This display fits owners of laptops that require the specific LP173WF2(TP)(B2) panel with a 50-pin interface and 17.3 inch dimensions. It is not suitable for buyers who need a touchscreen layer, a higher refresh rate than 60Hz, or a different pin count or physical size for their repair.
Deciding Specification
The 50-pin video connector is the critical specification that determines compatibility with the target laptop. The panel will not function if the host device uses a 30-pin, 40-pin or any other pin arrangement, regardless of matching screen size or resolution.
Highlights
- Full HD clarity with 1920x1080 resolution
- Bright 400 cd/m² output for vivid visuals
- 500:1 contrast ratio delivers deeper blacks
- Standard 60Hz refresh for smooth motion
- 50-pin connector ensures direct compatibility
Specifications
| Part Number | LP173WF2(TP)(B2) |
|---|---|
| Compatible Models | LP173WF2(TP)(B2) |
| Screen Size | 17.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
Does the 50-pin video connector on this 17.3 inch panel match the socket on my LP173WF2(TP)(B2) laptop?
Yes, the panel uses a 50-pin connector designed for the LP173WF2(TP)(B2) model. Verify the part number on your original screen before ordering.
What is the correct order for disconnecting the battery and releasing the 50-pin cable during installation?
Remove power and the internal battery first, then unlock the connector latch before gently pulling the 50-pin cable. Reversing this sequence risks a short circuit.
If the 400 cd/m² backlight dims unevenly after a few years, can the LED strip be replaced separately?
The LED backlight is integrated into the panel assembly; a noticeable drop in brightness or uniformity means replacing the whole 17.3 inch screen.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



