ATPAZDB
ATPAZDB LP173WD1 (TL)(H6) laptop screen 17.3 HD+ 1600x900 40 pins
A 17.3 inch HD+ laptop replacement screen with 1600x900 resolution, 40-pin connector, 60Hz refresh rate, 200 cd/m² brightness and 300:1 contrast ratio
- Compatible ModelsLP173WD1(TL)(H6)
- Screen Size17.3 inch
- Screen ResolutionHD+ 1600x900
- HD+ 1600x900 resolution gives sharp detail for everyday tasks
- 3 inch display provides ample workspace on a single panel
- 40-pin connector matches the original LP173WD1(TL)(H6) interface exactly
- 60 Hz refresh rate delivers smooth video playback and scrolling
- 200 cd/m² brightness with 300:1 contrast ensures clear visuals indoors
Exact replacement panel
This 17.3 inch HD+ display carries part number LP173WD1(TL)(H6) and matches the original panel in resolution, connector and mounting. It delivers a 1600x900 picture at 60Hz through a 40-pin video signal connector. The matte finish reduces glare for everyday work. Condition is new and ready to install.
Suits owners of the listed model
Buyers with a laptop that specifies the LP173WD1(TL)(H6) panel will find a direct fit. Laptops that require a different resolution, a 30-pin or 50-pin connector, a touch layer or a higher refresh rate cannot use this screen.
40-pin connector decides fit
The single specification that determines compatibility is the 40-pin video signal connector combined with the 1600x900 resolution. Verify the part number on the original panel before ordering.
Highlights
- HD+ 1600x900 resolution gives sharp detail for everyday tasks
- 3 inch display provides ample workspace on a single panel
- 40-pin connector matches the original LP173WD1(TL)(H6) interface exactly
- 60 Hz refresh rate delivers smooth video playback and scrolling
- 200 cd/m² brightness with 300:1 contrast ensures clear visuals indoors
Specifications
| Part Number | LP173WD1(TL)(H6) |
|---|---|
| Compatible Models | LP173WD1(TL)(H6) |
| Screen Size | 17.3 inch |
| Screen Resolution | HD+ 1600x900 |
Questions about this item
What resolution does the 40-pin connector on this LP173WD1 (TL)(H6) panel support?
The 40-pin video connector carries a 1600x900 HD+ signal at 60 Hz, matching the panel's native resolution and refresh rate.
What bezel opening and mounting pattern does this 17.3-inch screen require?
The panel fits a 17.3-inch chassis cut-out and uses the standard LP173WD1 (TL)(H6) mounting brackets for direct replacement.
How is the LP173WD1 (TL)(H6) installed, and which step is often missed?
Remove the bezel, disconnect the old 40-pin cable, fit the new panel, reconnect the cable firmly, then test before reattaching the bezel — skipping the pre-reassembly test is the common error.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



