ATPAZDB
ATPAZDB LP156WF6 (SP)(M1) 15.6" FHD 1920x1080 IPS 60Hz 30-pin laptop screen
A 15.6 inch IPS replacement panel with 1920x1080 resolution, 60 Hz refresh, 200 cd/m² brightness, 700:1 contrast and a 30-pin connector
- Compatible ModelsLP156WF6(SP)(M1)
- Screen Size15.6 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp Full HD detail from 1920x1080 IPS panel
- Consistent colour at wide angles with IPS technology
- Smooth 60 Hz refresh for everyday tasks
- 30-pin connector matches LP156WF6 (SP)(M1) exactly
- 200 cd/m² brightness suits indoor work
Replacement panel for 15.6 inch laptops
This 15.6 inch IPS display replaces a damaged LP156WF6 (SP)(M1) screen in compatible notebooks. It delivers a 1920x1080 Full HD image at a 60Hz refresh rate. The matte non-touch surface suits everyday office and study tasks. Buyers needing touch input or a higher refresh rate should look elsewhere.
Thermals noise and power in normal use
The panel runs at a typical brightness of 200 cd/m² with a 700:1 contrast ratio. As a passive component it adds no audible noise and draws minimal power from the laptop battery. Heat output is negligible compared to the system processor or graphics chip.
What the 30-pin connector changes
The 30-pin video signal connector matches the original LP156WF6 (SP)(M1) pin-out for a direct swap. No adapter cables or driver discs are included in the package. Installers must reuse existing bezel brackets and hinge covers from the old screen.
Highlights
- Sharp Full HD detail from 1920x1080 IPS panel
- Consistent colour at wide angles with IPS technology
- Smooth 60 Hz refresh for everyday tasks
- 30-pin connector matches LP156WF6 (SP)(M1) exactly
- 200 cd/m² brightness suits indoor work
Specifications
| Part Number | LP156WF6(SP)(M1) |
|---|---|
| Compatible Models | LP156WF6(SP)(M1) |
| Screen Size | 15.6 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
How do I connect the 30-pin video cable when installing this LP156WF6 panel?
Align the 30-pin connector with the motherboard socket and press straight in until it seats fully; the most common mistake is inserting it at an angle, which bends pins and causes a blank or flickering display.
Which component will need replacement first if the backlight degrades on this 15.6-inch IPS screen?
The LED backlight is integrated into the panel, so a drop from the rated 200 cd/m² brightness means replacing the entire LP156WF6 display assembly rather than a separate inverter or lamp.
At what point does the 60 Hz refresh rate become the limiting factor during sustained use?
The 60 Hz refresh rate caps motion updates to 60 frames per second, so fast-paced gaming or high-frame-rate video will show motion blur or tearing before the 700:1 contrast ratio or 200 cd/m² brightness become limiting factors.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



