ATPAZDB
ATPAZDB LP156WF1 laptop screen 15.6 40 Pins 60Hz FHD 1920x1080 No Touch
A 15.6 inch replacement panel with 40 pins, 60 Hz refresh, 1920×1080 resolution and no touch layer
- Compatible ModelsLP156WF1(SP)(D1)
- Screen Size15.6 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp Full HD detail with 1920x1080 resolution
- Smooth 60 Hz refresh for fluid motion
- Ready to install with 40-pin video connector
- Non-touch 15.6 inch panel keeps weight low
- 400:1 contrast ratio delivers clear dark scenes
15.6 inch FHD replacement screen
This new ATPAZDB LP156WF1 panel is a 15.6 inch Full HD display built to replace a damaged or dim original screen in a compatible laptop. It delivers a 1920x1080 resolution at 60 Hz through a 40 pin video connector and has a 400:1 contrast ratio. The surface is non-touch.
Compatibility and touch requirement
The part suits owners of laptops that originally used the LP156WF1 (SP)(D1) panel and need a direct swap with the same 40 pin interface and 60 Hz timing. It will not work for machines that require a different pin count, a higher refresh rate, or touch input.
40 pin video connector
The single specification that decides fit is the 40 pin video signal connector; the replacement screen must match this exact interface to connect to the laptop's internal cable.
Highlights
- Sharp Full HD detail with 1920x1080 resolution
- Smooth 60 Hz refresh for fluid motion
- Ready to install with 40-pin video connector
- Non-touch 15.6 inch panel keeps weight low
- 400:1 contrast ratio delivers clear dark scenes
Specifications
| Part Number | LP156WF1(SP)(D1) |
|---|---|
| Compatible Models | LP156WF1(SP)(D1) |
| Screen Size | 15.6 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
What 40-pin connector does my laptop need for this LP156WF1 screen?
Your laptop must provide a 40-pin video signal connector that matches the LP156WF1(SP)(D1) panel specification.
Will this 60 Hz panel work if my original screen ran at a different refresh rate?
The panel operates at 60 Hz; your laptop's display controller must support that refresh rate for the screen to function correctly.
How can I confirm the 1920x1080 resolution is active after fitting the screen?
Check your operating system's display settings — they should report 1920x1080 at 60 Hz with no touch input detected.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



