ATPAZDB
ATPAZDB LP156WF1 laptop screen 15.6 1920x1080 40 Pins 60Hz
A 15.6 inch Full HD laptop replacement screen with a 40-pin connector, 60 Hz refresh rate, 300 cd/m² brightness and 500:1 contrast ratio
- Compatible ModelsLP156WF1(TL)(B2)
- Screen Size15.6 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Full HD 1920x1080 resolution for sharp visuals
- 6 inch display fits LP156WF1 models
- 40-pin connector ensures direct compatibility
- 60Hz refresh rate delivers smooth motion
- 300 cd/m² brightness with 500:1 contrast ratio
15.6-inch FHD laptop replacement screen
This 15.6 inch panel matches the LP156WF1(TL)(B2) part number for direct replacement. It delivers a 1920x1080 Full HD resolution on a non-touch display. The 40-pin video connector ensures compatibility with the specified models. Installers can swap the screen without adapter cables.
300 cd/m² brightness and 60 Hz refresh
Typical brightness reaches 300 cd/m² with a 500:1 contrast ratio for readable indoor viewing. The 60 Hz refresh rate handles standard office and video playback without motion blur. Power draw remains low, producing minimal heat inside the laptop chassis. Fan noise is unaffected by the panel itself.
40-pin connector decides fit
The single specification that determines compatibility is the 40-pin video signal connector. Laptops using a different pin count or connector layout cannot accept this panel. Buyers who need a 30-pin or 50-pin interface must source a different screen. Verify the original part number before ordering.
Highlights
- Full HD 1920x1080 resolution for sharp visuals
- 6 inch display fits LP156WF1 models
- 40-pin connector ensures direct compatibility
- 60Hz refresh rate delivers smooth motion
- 300 cd/m² brightness with 500:1 contrast ratio
Specifications
| Part Number | LP156WF1(TL)(B2) |
|---|---|
| Compatible Models | LP156WF1(TL)(B2) |
| Screen Size | 15.6 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
How do I install the LP156WF1 screen and which step is often missed?
Remove the bezel, disconnect the 40-pin video connector from the old panel, fit the new screen, reconnect the 40-pin cable securely, then test before reassembling; the step most people skip is verifying the display works before snapping the bezel back on.
What maintenance or replacement will the LP156WF1 need over time?
The panel has no user-serviceable parts; if the 300 cd/m² backlight dims or the 500:1 contrast degrades after years of use, the entire screen must be replaced as a unit.
What limit appears first during sustained use of the LP156WF1?
The 60 Hz refresh rate caps motion smoothness during extended gaming or video sessions, and the fixed 300 cd/m² brightness cannot be increased for very bright environments.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



