ATPAZDB
ATPAZDB LP140WF6 (SP)(D1) laptop screen 14 inch 1920x1080 IPS 30 pins 60Hz
A 14-inch IPS laptop replacement screen with 1920x1080 resolution, 30-pin connector, 60Hz refresh rate, 220 cd/m² brightness and 700:1 contrast ratio
- Compatible ModelsLP140WF6(SP)(D1)
- Screen Size14 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp Full HD detail on a 14 inch IPS panel
- Wide viewing angles from IPS technology
- 220 cd/m² brightness suits indoor work
- 700:1 contrast adds depth to images
- 30 pin connector matches LP140WF6 (SP)(D1) laptops
14-inch IPS replacement panel
This 14-inch IPS panel replaces a damaged LP140WF6 (SP)(D1) screen. It delivers Full HD 1920x1080 resolution at a 60Hz refresh rate. The matte IPS surface provides wide viewing angles and 220 cd/m² brightness. A 30-pin video connector links the display to the laptop motherboard.
Buyers matching the exact part number
This screen suits owners of laptops factory-fitted with the LP140WF6 (SP)(D1) panel. It will not fit models that require a different pin count, bracket layout or touch-digitiser integration. Buyers needing touch input, higher refresh rates or a different connector should look elsewhere.
30-pin video connector compatibility
The single specification that decides fit is the 30-pin video signal connector. Your original screen must use the identical 30-pin interface and LP140WF6 (SP)(D1) part number. Verify the part number on the back of the existing panel before ordering.
Highlights
- Sharp Full HD detail on a 14 inch IPS panel
- Wide viewing angles from IPS technology
- 220 cd/m² brightness suits indoor work
- 700:1 contrast adds depth to images
- 30 pin connector matches LP140WF6 (SP)(D1) laptops
Specifications
| Part Number | LP140WF6(SP)(D1) |
|---|---|
| Compatible Models | LP140WF6(SP)(D1) |
| Screen Size | 14 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
Will the 30-pin connector on this 14-inch panel match my laptop's video cable?
This screen uses a 30-pin video signal connector. Check your current panel's part number — it must read LP140WF6(SP)(D1) for the pin-out to align.
Which step do installers most often skip when fitting this LP140WF6(SP)(D1) screen?
After inserting the 30-pin cable, the retaining latch must be flipped down. Many forget to lock it, causing flicker or no image at the 60 Hz refresh rate.
What component will likely need replacement before this 220 cd/m² IPS panel itself fails?
The backlight driver on the motherboard typically ages first. If brightness drops unevenly at the 700:1 contrast ratio, test the inverter or PWM circuit before ordering another screen.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



