We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Thin 14 inch matte LCD panel, 40 pin connector visible

ATPAZDB

ATPAZDB LP140UD1(SP)(D3) 14 inch UHD 4K 3840x2160 40 Pins 60Hz

SKU CH-WAXD-RSV8B

14-inch UHD 4K replacement panel with 3840×2160 resolution, 350 cd/m² brightness, 1050:1 contrast, 60 Hz refresh and a 40-pin connector

  • Compatible ModelsLP140UD1(SP)(D3)
  • Screen Size14 inch
  • Screen ResolutionUHD 4K 3840x2160
  • Sharp UHD 4K detail with 3840×2160 resolution
  • Vivid brightness at 350 cd/m² for clear viewing
  • Strong 1050:1 contrast for deep blacks
  • Ready to install with 40-pin connector

14-inch UHD 4K replacement panel

This 14-inch display panel delivers a 3840x2160 UHD 4K resolution at a 60 Hz refresh rate. It uses a 40-pin video signal connector and is built as a direct replacement for the LP140UD1(SP)(D3) part number. The screen offers 350 cd/m² brightness and a 1050:1 contrast ratio without touch functionality.

Non-touch design for compatible laptops

The absence of a touch layer keeps the assembly thinner and lighter for standard clamshell chassis. A 40-pin interface matches the original cable routing on supported models. Buyers needing touch input or a different pin count should verify their laptop's exact screen specification before ordering.

Highlights

  • Sharp UHD 4K detail with 3840×2160 resolution
  • Vivid brightness at 350 cd/m² for clear viewing
  • Strong 1050:1 contrast for deep blacks
  • Ready to install with 40-pin connector

Specifications

Part NumberLP140UD1(SP)(D3)
Compatible ModelsLP140UD1(SP)(D3)
Screen Size14 inch
Screen ResolutionUHD 4K 3840x2160

Questions about this item

Will the 40-pin video connector need to be replaced if the cable frays?

The 40-pin connector is part of the panel assembly; if the cable frays you replace the whole screen rather than just the connector.

At 350 cd/m² brightness, will sustained maximum output cause the backlight to dim first?

The 350 cd/m² rating is the panel's specified maximum; sustained use at that level will age the backlight before any other component.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.