ATPAZDB
ATPAZDB LP133WX2 (TL)(E1) 13.3″ WXGA 1280x800 40-pin laptop screen
13.3″ WXGA 1280×800 replacement panel, 40-pin, 60 Hz, 200 cd/m² brightness, 500:1 contrast, non-touch
- Compatible ModelsLP133WX2(TL)(E1)
- Screen Size13.3 inch
- Screen ResolutionWXGA 1280x800
- Sharp WXGA 1280x800 detail on a 13.3 inch panel
- Bright 200 cd/m² backlight for clear indoor viewing
- 500:1 contrast ratio adds depth to text and images
- Smooth 60Hz refresh keeps motion fluid
- Direct 40-pin connector matches LP133WX2(TL)(E1) exactly
Replacement screen for 13.3″ laptops
This new ATPAZDB LP133WX2 panel matches the 13.3 inch WXGA 1280x800 specification of the original display. It uses a 40-pin video connector and a 60 Hz refresh rate. The matte finish delivers 200 cd/m² brightness and a 500:1 contrast ratio. No touch layer is included.
Who this fits and who it does not
It fits laptops that require the exact LP133WX2 (TL)(E1) part number with a 40-pin interface. Buyers whose machines use a different connector count, a touch-enabled assembly, or a higher resolution panel should look elsewhere.
Connector and resolution check
Verify that the original screen uses a 40-pin connector and a 1280x800 WXGA resolution before ordering. The 60 Hz refresh rate and 200 cd/m² brightness are fixed by this model. Matching these three details confirms compatibility.
Highlights
- Sharp WXGA 1280x800 detail on a 13.3 inch panel
- Bright 200 cd/m² backlight for clear indoor viewing
- 500:1 contrast ratio adds depth to text and images
- Smooth 60Hz refresh keeps motion fluid
- Direct 40-pin connector matches LP133WX2(TL)(E1) exactly
Specifications
| Part Number | LP133WX2(TL)(E1) |
|---|---|
| Compatible Models | LP133WX2(TL)(E1) |
| Screen Size | 13.3 inch |
| Screen Resolution | WXGA 1280x800 |
Questions about this item
How do I install the LP133WX2 (TL)(E1) 13.3″ 40-pin screen and what step is often missed?
Remove the bezel, disconnect the old 40-pin connector, fit the new panel, reconnect the cable firmly, then test before reattaching the bezel; the step most people skip is verifying the display works before snapping the bezel back on.
What maintenance or replacement will the LP133WX2 (TL)(E1) panel need over time?
The CCFL backlight in this 200 cd/m² panel will dim with age; plan to replace the inverter or the whole screen once brightness drops below usable levels.
What limit appears first during sustained use of the LP133WX2 (TL)(E1) display?
The 200 cd/m² brightness ceiling is reached immediately, so extended sessions in bright rooms hit the panel's maximum luminance before any thermal or refresh constraint.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



