ATPAZDB
ATPAZDB LP133WX2 (TL)(C6) 13.3" WXGA 1280x800 30-pin laptop screen
A 13.3 inch WXGA 1280x800 laptop replacement panel with 30-pin connector, 60Hz refresh, 275 cd/m² brightness and 600:1 contrast
- Compatible ModelsLP133WX2(TL)(C6)
- Screen Size13.3 inch
- Screen ResolutionWXGA 1280x800
- WXGA 1280x800 resolution gives sharp everyday detail
- 3 inch diagonal fits compact laptop chassis
- 30-pin video connector matches original panel exactly
- 275 cd/m² brightness suits indoor work environments
- 600:1 contrast ratio renders readable text and images
13.3-inch WXGA replacement panel
This 13.3-inch LP133WX2(TL)(C6) panel replaces a damaged or dim laptop screen with a WXGA 1280x800 resolution. It connects through a 30-pin video signal connector and operates at a 60Hz refresh rate. The matte finish reduces glare in bright environments.
For WXGA 30-pin laptops only
Suits owners of laptops that originally shipped with the LP133WX2(TL)(C6) part number and a 30-pin connector. Not for machines that require a touch-sensitive digitizer, a different pin count, a higher resolution such as Full HD, or a different physical size.
30-pin connector compatibility
The single specification that decides fit is the 30-pin video signal connector paired with the exact LP133WX2(TL)(C6) part number. Verify this connector and part number on your current panel before ordering.
Highlights
- WXGA 1280x800 resolution gives sharp everyday detail
- 3 inch diagonal fits compact laptop chassis
- 30-pin video connector matches original panel exactly
- 275 cd/m² brightness suits indoor work environments
- 600:1 contrast ratio renders readable text and images
Specifications
| Part Number | LP133WX2(TL)(C6) |
|---|---|
| Compatible Models | LP133WX2(TL)(C6) |
| Screen Size | 13.3 inch |
| Screen Resolution | WXGA 1280x800 |
Questions about this item
Does the 30-pin video connector match the LP133WX2 (TL)(C6) panel?
Yes, the panel uses a 30-pin video signal connector that matches the LP133WX2 (TL)(C6) specification exactly.
What is the correct way to seat the 30-pin connector during installation?
Align the 30-pin connector carefully and press it straight in until it clicks; forcing it at an angle bends pins and causes no image or coloured lines.
Which component typically fails first on a 275 cd/m² 60 Hz WXGA panel?
The backlight or its driver circuit usually ages first; dimming, flickering or a pink tint at start-up signals it needs replacement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



