ATPAZDB
ATPAZDB LP133WX1 laptop screen 13.3" WXGA 1280x800 30 pins
A 13.3 inch WXGA 1280x800 replacement panel with 30-pin connector, 250 cd/m² brightness and 60Hz refresh rate
- Compatible ModelsLP133WX1(TL)(N1)
- Screen Size13.3 inch
- Screen ResolutionWXGA 1280x800
- 3 inch display fits LP133WX1(TL)(N1) models
- WXGA 1280x800 resolution gives clear visuals
- 250 cd/m² brightness works in normal light
- 400:1 contrast ratio adds depth to images
- 30 pin connector matches original panel exactly
Replacement screen details
This is a 13.3 inch WXGA replacement panel with a 1280x800 resolution and 30-pin video connector. It operates at a 60Hz refresh rate with 250 cd/m² brightness and a 400:1 contrast ratio. The screen is non-touch and matches part number LP133WX1(TL)(N1). It is a brand new component for repairing a damaged laptop display.
Compatibility and use cases
This panel suits owners of laptops requiring the exact LP133WX1(TL)(N1) part number for a 13.3 inch WXGA screen. It is not for users needing a touchscreen interface or a higher resolution such as Full HD. Buyers with a different pin count, screen size, or connector type should look elsewhere.
Critical specification check
The 30-pin video signal connector is the single specification that decides fitment. Verify the original screen uses an identical 30-pin interface before ordering. A different pin count will prevent installation regardless of matching size or resolution.
Highlights
- 3 inch display fits LP133WX1(TL)(N1) models
- WXGA 1280x800 resolution gives clear visuals
- 250 cd/m² brightness works in normal light
- 400:1 contrast ratio adds depth to images
- 30 pin connector matches original panel exactly
Specifications
| Part Number | LP133WX1(TL)(N1) |
|---|---|
| Compatible Models | LP133WX1(TL)(N1) |
| Screen Size | 13.3 inch |
| Screen Resolution | WXGA 1280x800 |
Questions about this item
What resolution does the 30-pin connector on this LP133WX1 panel actually support?
The 30-pin video signal connector carries a WXGA 1280x800 signal at 60 Hz, so that is the native resolution you will see.
What are the exact mounting dimensions for the LP133WX1 (TL)(N1) screen?
The panel is a 13.3 inch display with a 30-pin connector; match the original LP133WX1(TL)(N1) part number and screw-hole pattern before fitting.
Which way does the 30-pin ribbon cable plug into the LP133WX1, and what is the common mistake?
Align the gold contacts toward the motherboard connector and press evenly; the frequent error is inserting the ribbon upside down or off-centre, bending pins.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



