We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A thin 13.3 inch matte display panel with a 30 pin connector visible on the ribbon cable

ATPAZDB

ATPAZDB LP133WQ1 (SJ)(E1) 13.3" WQXGA 2560x1600 30 Pins laptop screen

SKU CH-BPQX-PAVX7

A 13.3 inch WQXGA 2560x1600 replacement panel with 30-pin connector, 60Hz refresh and 900:1 contrast for MacBook Pro Retina A1502

  • Compatible ModelsLP133WQ1(SJ)(E1)
  • Screen Size13.3 inch
  • Screen ResolutionWQXGA 2560x1600
  • WQXGA 2560x1600 resolution delivers sharp visual detail
  • 3 inch panel fits MacBook Pro Retina A1502 exactly
  • 30-pin connector matches original LP133WQ1(SJ)(E1) specification
  • 60 Hz refresh rate provides smooth on-screen motion
  • 900:1 contrast ratio produces deep blacks and bright whites

Compatible replacement panel

This 13.3 inch WQXGA panel replaces the LP133WQ1(SJ)(E1) used in the MacBook Pro Retina A1502. It delivers a native resolution of 2560x1600 over a 30‑pin video signal connector. The screen is a non‑touch display designed for direct swap installation. Buyers needing a touch‑enabled panel or a different connector pin count should look elsewhere.

Thermal and power profile

The display operates at a standard 60Hz refresh rate with a typical contrast ratio of 900:1. As a passive LCD component it generates negligible heat and draws minimal power from the host system. No active cooling or additional power circuitry is required for normal operation.

Included fitment assurance

The unit is supplied as a new replacement screen matching the original part number and connector layout. No extra cables, adhesives, tools or calibration software are bundled with the panel. Installers must reuse existing mounting hardware and display cables from the original assembly.

Highlights

  • WQXGA 2560x1600 resolution delivers sharp visual detail
  • 3 inch panel fits MacBook Pro Retina A1502 exactly
  • 30-pin connector matches original LP133WQ1(SJ)(E1) specification
  • 60 Hz refresh rate provides smooth on-screen motion
  • 900:1 contrast ratio produces deep blacks and bright whites

Specifications

Part NumberLP133WQ1(SJ)(E1)
Compatible ModelsLP133WQ1(SJ)(E1)
Screen Size13.3 inch
Screen ResolutionWQXGA 2560x1600

Questions about this item

How do I route the 30-pin video cable through the MacBook Pro Retina A1502 hinge without pinching it?

Feed the 30-pin connector along the left hinge channel, keeping the flat cable flat against the chassis; the pinch point is the lower clutch cover — lift it, route the cable, then snap the cover back before tightening the display screws.

When will the 900:1 contrast ratio start to look washed out on this LP133WQ1(SJ)(E1) panel?

The 900:1 contrast is a panel specification that does not degrade over time; only backlight ageing reduces perceived contrast, typically after several years of continuous 60 Hz operation at high brightness.

At what point does the 60 Hz refresh rate become the bottleneck during sustained video playback on this 2560x1600 screen?

The 60 Hz refresh rate caps motion updates to 60 frames per second; sustained playback of 2560x1600 content above 60 fps will show frame duplication, not panel overheating or signal loss.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.