ATPAZDB
ATPAZDB LP133WQ1 laptop screen 13.3″ WQXGA 2560×1600 40-pin 60Hz
A 13.3″ WQXGA replacement panel with 2560×1600 resolution, 40-pin connector, 60 Hz refresh, 300 cd/m² brightness and 1300:1 contrast
- Compatible ModelsLP133WQ1(SP)(B1)
- Screen Size13.3 inch
- Screen ResolutionWQXGA 2560x1600
- WQXGA 2560×1600 resolution renders crisp detail on 13.3 inch panel
- 300 cd/m² brightness delivers clear visibility in varied lighting
- 1300:1 contrast ratio produces deep blacks and bright whites
- 60 Hz refresh rate ensures smooth motion for everyday tasks
- 40-pin connector matches LP133WQ1(SP)(B1) for direct replacement
Compatible 13.3″ WQXGA Replacement Panel
This 13.3 inch display replaces a damaged LP133WQ1(SP)(B1) panel. It delivers a WQXGA 2560x1600 resolution at a 60Hz refresh rate. The panel connects through a 40-pin video signal connector. It is a non-touch screen with 300 cd/m² brightness.
Who This Fits and Who It Does Not
This screen suits owners of a laptop that uses the exact LP133WQ1(SP)(B1) part number. Buyers whose device requires a different connector, a touch layer, or another form factor cannot use this panel. Verify the original part number before ordering.
The Deciding Specification
The 40-pin video signal connector is the single specification that determines compatibility. If the original screen uses a different pin count or layout, this panel will not connect. Match the part number and connector precisely.
Highlights
- WQXGA 2560×1600 resolution renders crisp detail on 13.3 inch panel
- 300 cd/m² brightness delivers clear visibility in varied lighting
- 1300:1 contrast ratio produces deep blacks and bright whites
- 60 Hz refresh rate ensures smooth motion for everyday tasks
- 40-pin connector matches LP133WQ1(SP)(B1) for direct replacement
Specifications
| Part Number | LP133WQ1(SP)(B1) |
|---|---|
| Compatible Models | LP133WQ1(SP)(B1) |
| Screen Size | 13.3 inch |
| Screen Resolution | WQXGA 2560x1600 |
Questions about this item
Does this 13.3 inch panel use a 40-pin video connector for the laptop motherboard?
Yes, the screen connects through a 40-pin video signal connector that matches the LP133WQ1 (SP)(B1) specification.
What is the correct order for securing the display cable and bezel clips during installation?
Connect the 40-pin cable fully before snapping the bezel clips, otherwise the connector can sit loose and cause flicker.
How often should the 300 cd/m² backlight be checked for dimming on this 60Hz WQXGA panel?
The LED backlight is rated for typical notebook lifespans; plan a replacement only if brightness drops noticeably below the original 300 cd/m² level.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



