ATPAZDB
ATPAZDB LP133WF9(SP)(F3) Laptop Screen 13.3 30 Pins 60Hz FHD 1920x1080
13.3-inch Full HD 1920x1080 laptop replacement panel with 30-pin connector, 60 Hz refresh, 400 cd/m² brightness and 1500:1 contrast, non-touch
- Compatible ModelsLP133WF9(SP)(F3)
- Screen Size13.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp Full HD detail with 1920 x 1080 resolution
- Bright 400 cd/m² panel for clear indoor viewing
- High 1500:1 contrast ratio for deep blacks
- Smooth 60 Hz refresh rate for everyday tasks
- Direct 30-pin fit for LP133WF9(SP)(F3) models
13.3-inch FHD replacement panel
This 13.3-inch display replaces a damaged LP133WF9(SP)(F3) screen on compatible laptops. It delivers a 1920x1080 Full HD image at 60Hz through a 30-pin video connector. The matte finish operates without touch functionality. Brightness reaches 400 cd/m² with a 1500:1 contrast ratio.
Repair technicians and DIY laptop owners
The panel suits anyone restoring a laptop that originally used the LP133WF9(SP)(F3) part number. Buyers who need a touchscreen layer or a higher refresh rate should look at a different model. Devices requiring a different pin count or resolution will not accept this screen.
Verify the exact part number and connector
Confirm the original screen bears the LP133WF9(SP)(F3) part number before ordering. Check that the laptop’s video cable uses a 30-pin connector matching this panel. Ensure the mounting brackets and cable routing align with the 13.3-inch form factor.
Highlights
- Sharp Full HD detail with 1920 x 1080 resolution
- Bright 400 cd/m² panel for clear indoor viewing
- High 1500:1 contrast ratio for deep blacks
- Smooth 60 Hz refresh rate for everyday tasks
- Direct 30-pin fit for LP133WF9(SP)(F3) models
Specifications
| Part Number | LP133WF9(SP)(F3) |
|---|---|
| Compatible Models | LP133WF9(SP)(F3) |
| Screen Size | 13.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
What laptop connector does the LP133WF9(SP)(F3) screen need to work?
The panel uses a 30-pin video signal connector, so the host laptop must provide a matching 30-pin eDP interface.
Will this 60 Hz panel run normally if my original screen was also 60 Hz?
Yes, the 60 Hz refresh rate matches a 60 Hz original, so the system timing stays unchanged and no driver adjustment is required.
How can I confirm the LP133WF9(SP)(F3) is performing correctly after installation?
Verify the BIOS or OS reports 1920x1080 at 60 Hz, check for uniform 400 cd/m² brightness and a 1500:1 contrast ratio, and ensure no dead pixels or backlight bleed appear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



