ATPAZDB
ATPAZDB LP133WF9(SP)(D2) 13.3" FHD 1920x1080 60Hz 30-pin laptop screen
13.3 inch 1920x1080 60Hz 30-pin replacement panel with 300 cd/m² brightness and 1200:1 contrast
- Compatible ModelsLP133WF9(SP)(D2)
- Screen Size13.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp 1920 x 1080 Full HD detail on a 13.3 inch panel
- 300 cd/m² brightness keeps content clear in bright rooms
- 1200:1 contrast ratio adds depth to dark scenes
- 60 Hz refresh delivers smooth everyday motion
- 30-pin connector matches LP133WF9(SP)(D2) exactly
Exact replacement panel
This 13.3 inch display matches part number LP133WF9(SP)(D2) and delivers Full HD 1920x1080 resolution at 60Hz. A 30-pin video connector and non-touch surface make it a direct swap for the original screen. Brightness reaches 300 cd/m² with a 1200:1 contrast ratio for clear text and video.
For owners of the LP133WF9(SP)(D2) panel
Buyers needing a different pin count, touch capability, higher refresh rate or alternate resolution cannot use this part. Laptops that require a 40-pin interface or an integrated digitiser will need a separate compatible panel.
30-pin connector decides fit
The 30-pin video signal connector is the single specification that determines whether this screen installs correctly. Verify the existing panel uses the same 30-pin layout before ordering.
Highlights
- Sharp 1920 x 1080 Full HD detail on a 13.3 inch panel
- 300 cd/m² brightness keeps content clear in bright rooms
- 1200:1 contrast ratio adds depth to dark scenes
- 60 Hz refresh delivers smooth everyday motion
- 30-pin connector matches LP133WF9(SP)(D2) exactly
Specifications
| Part Number | LP133WF9(SP)(D2) |
|---|---|
| Compatible Models | LP133WF9(SP)(D2) |
| Screen Size | 13.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
Does my laptop need a 30-pin video connector to accept this 13.3 inch panel?
Yes — the screen uses a 30-pin video signal connector, so the host must provide a matching 30-pin cable and eDP signalling.
Will this 60 Hz Full HD display work if my original panel was a lower-resolution 13.3 inch screen?
It can work provided the laptop’s eDP controller supports 1920x1080 at 60 Hz and the 30-pin pinout matches the LP133WF9(SP)(D2) specification.
How can I verify the panel is operating correctly after installation?
Check that the BIOS and OS detect a 13.3 inch 1920x1080 60 Hz panel, then confirm uniform 300 cd/m² brightness and a 1200:1 contrast ratio with a test pattern.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



