ATPAZDB
ATPAZDB LP133WF6 13.3 inch FHD 1920x1080 40-pin touch laptop screen
13.3 inch Full HD 1920x1080 touch panel with 40-pin connector, 300 cd/m² brightness and 800:1 contrast at 60 Hz
- Compatible ModelsLP133WF6(SP)(G1)
- Screen Size13.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp 13.3 inch Full HD touch display
- 300 cd/m² brightness for clear visuals
- 800:1 contrast ratio adds depth
- 60 Hz refresh rate ensures smooth motion
- 40-pin connector matches LP133WF6(SP)(G1) exactly
13.3 inch FHD touch replacement screen
This ATPAZDB LP133WF6 panel replaces a damaged or dim display on compatible 13.3 inch laptops. It delivers Full HD 1920x1080 resolution with a 40-pin video connector and integrated touch functionality. Buyers needing a different screen size, a non-touch variant or a higher refresh rate should look elsewhere.
Thermals noise and power draw
As a passive LCD component the screen generates no audible noise and adds negligible heat inside the chassis. Typical brightness of 300 cd/m² and a 60 Hz refresh rate keep power consumption low during normal office or media use.
40-pin Full HD touch compatibility
The decisive specification is the 40-pin connector paired with 1920x1080 resolution and touch support matching part number LP133WF6(SP)(G1). Verify this exact part number on your existing panel before ordering.
Highlights
- Sharp 13.3 inch Full HD touch display
- 300 cd/m² brightness for clear visuals
- 800:1 contrast ratio adds depth
- 60 Hz refresh rate ensures smooth motion
- 40-pin connector matches LP133WF6(SP)(G1) exactly
Specifications
| Part Number | LP133WF6(SP)(G1) |
|---|---|
| Compatible Models | LP133WF6(SP)(G1) |
| Screen Size | 13.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
How do I install the LP133WF6 40-pin touch screen and which step is most often done wrong?
Disconnect the battery, remove the bezel, unplug the old 40-pin connector, fit the new panel, reconnect the 40-pin cable, then test before reassembling. The step most often missed is forgetting to disconnect the battery first.
What maintenance or replacement will the LP133WF6 need later?
No scheduled maintenance is required. If the backlight dims below the rated 300 cd/m² or the touch layer loses calibration, the whole panel must be replaced.
What limit appears first on the LP133WF6 during sustained use?
The 60 Hz refresh rate caps motion smoothness, and the 800:1 contrast ratio limits dark-scene detail before any thermal throttle occurs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



