ATPAZDB
ATPAZDB LP133WF2 laptop screen 13.3 inch 1920x1080 IPS 60Hz 30 pin
A 13.3 inch IPS display with 1920x1080 resolution, 60Hz refresh rate and a 30 pin connector
- Compatible ModelsLP133WF2(SP)(L4)
- Screen Size13.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp Full HD detail on a 13.3 inch IPS panel
- Smooth 60 Hz refresh keeps motion clear
- 30-pin connector matches the original LP133WF2(SP)(L4) exactly
- Non-touch surface avoids glare and fingerprint smudges
- New replacement screen restores display quality without modification
Direct-fit 13.3 inch FHD panel
This 13.3 inch IPS display replaces the LP133WF2(SP)(L4) panel in compatible notebooks. It delivers 1920x1080 resolution at a 60Hz refresh rate through a 30-pin video connector. The screen is non-touch and designed for exact mechanical fit.
Low-power IPS operation
IPS technology provides consistent colour and wide viewing angles without the higher current draw of touch-enabled layers. At 60Hz the panel runs cool and silent, adding minimal load to the laptop's thermal budget. Power consumption stays in line with standard 13.3 inch FHD replacement screens.
No extra parts required
The unit ships as a bare panel matching the original 30-pin interface, so no adapter cables or driver discs are bundled. Installers simply swap the screen and reconnect the existing harness. No software calibration tool is included or needed for basic operation.
Highlights
- Sharp Full HD detail on a 13.3 inch IPS panel
- Smooth 60 Hz refresh keeps motion clear
- 30-pin connector matches the original LP133WF2(SP)(L4) exactly
- Non-touch surface avoids glare and fingerprint smudges
- New replacement screen restores display quality without modification
Specifications
| Part Number | LP133WF2(SP)(L4) |
|---|---|
| Compatible Models | LP133WF2(SP)(L4) |
| Screen Size | 13.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
How do I connect the 30-pin video signal connector during installation?
Align the 30-pin cable with the motherboard socket, press straight in until the latch clicks, then secure the panel screws without forcing the flex cable bend radius.
What component will need replacement if the backlight dims over time?
The IPS panel backlight is integrated; when brightness drops below usable levels the entire 13.3 inch 1920x1080 display module must be swapped.
At what refresh rate does motion blur become noticeable during sustained gaming?
The 60Hz refresh rate is the fixed limit; fast-panning scenes will show blur once frame rates exceed 60 frames per second.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



