ATPAZDB
ATPAZDB B156HAN12.H 15.6" 1920x1080 300Hz IPS 40-pin laptop screen
15.6-inch IPS panel delivers 1920x1080 resolution at 300Hz refresh rate with 300 cd/m² brightness and 40-pin connector
- Compatible ModelsB156HAN12.H
- Screen Size15.6 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Smooth motion for fast gaming with 300Hz refresh rate
- Sharp Full HD detail from 1920x1080 resolution
- Consistent colour across wide angles via IPS panel
- Bright 300 cd/m² output for clear indoor viewing
- Direct 40-pin fit for B156HAN12.H replacement
15.6-inch 300 Hz IPS replacement panel
This ATPAZDB B156HAN12.H display is a 15.6 inch Full HD IPS panel built for laptop repair. It delivers a 1920x1080 resolution, 300 Hz refresh rate and 300 cd/m² brightness. The 40-pin video connector matches the original part number exactly.
Replaces a cracked or lower-refresh screen
Install this panel when the existing B156HAN12.H panel is damaged or limited to a slower refresh rate. The 300 Hz update and 1000:1 contrast ratio restore fluid motion and clear image quality. Compatibility is limited to the listed part number.
Suits repair shops and DIY technicians
Technicians replacing a non-touch 15.6 inch FHD panel with a 40-pin interface will find a direct fit. Buyers needing touch input, a different connector count, or a higher resolution should look elsewhere.
Highlights
- Smooth motion for fast gaming with 300Hz refresh rate
- Sharp Full HD detail from 1920x1080 resolution
- Consistent colour across wide angles via IPS panel
- Bright 300 cd/m² output for clear indoor viewing
- Direct 40-pin fit for B156HAN12.H replacement
Specifications
| Part Number | B156HAN12.H |
|---|---|
| Compatible Models | B156HAN12.H |
| Screen Size | 15.6 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
Will the 40-pin connector on this 15.6 inch panel match my laptop's video cable?
Yes, the panel uses a 40-pin video signal connector that plugs directly into the matching socket on the laptop motherboard.
What is the common installation mistake with the 40-pin ribbon cable?
The ribbon cable is often inserted upside-down or not fully seated; align the gold contacts with the connector pins and press until the retaining clip clicks.
How long before the 300 cd/m² backlight typically dims enough to need replacement?
The IPS backlight is rated for tens of thousands of hours; expect several years of normal use before brightness drops to half its original 300 cd/m² level.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



