ATPAZDB
ATPAZDB B140HTN01.C laptop screen 14 inch FHD 1920x1080 60Hz 30 pin
A 14 inch FHD 1920x1080 60Hz panel with 30 pin connector and 220 cd/m² brightness
- Compatible ModelsB140HTN01.C
- Screen Size14 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp Full HD detail on a 14 inch panel
- 1920 x 1080 resolution for crisp text and images
- 60 Hz refresh keeps everyday motion smooth
- 220 cd/m² brightness suits indoor work
- 30-pin connector matches B140HTN01.C exactly
14 inch FHD 30-pin replacement panel
This new 14 inch display panel carries part number B140HTN01.C and delivers a Full HD resolution of 1920x1080 at 60Hz. It connects through a 30 pin video signal connector and is built without touch functionality. The screen offers 220 cd/m² brightness and a 400:1 contrast ratio.
Compatibility and use-case fit
The panel matches laptops that specify the exact B140HTN01.C part number and a 30 pin interface. Buyers whose devices require a different connector count, a touch layer, or a higher refresh rate should look at other screens.
Deciding specification: 30 pin connector
The 30 pin video signal connector is the single detail that determines whether this panel will install and function in a given laptop. Confirm the original screen uses the same pin count before ordering.
Highlights
- Sharp Full HD detail on a 14 inch panel
- 1920 x 1080 resolution for crisp text and images
- 60 Hz refresh keeps everyday motion smooth
- 220 cd/m² brightness suits indoor work
- 30-pin connector matches B140HTN01.C exactly
Specifications
| Part Number | B140HTN01.C |
|---|---|
| Compatible Models | B140HTN01.C |
| Screen Size | 14 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
Will the 30-pin connector on this B140HTN01.C screen match my laptop's video cable?
The panel uses a 30-pin video signal connector; verify your original screen also carries the B140HTN01.C part number to confirm pin-out compatibility.
Which step do installers most often miss when fitting this 14-inch FHD panel?
Forgetting to reseat the 30-pin ribbon fully and lock the connector latch causes a blank or flickering display after reassembly.
How do I replace the backlight on this B140HTN01.C unit if it dims over time?
The backlight is integrated into the panel; when brightness drops below the 220 cd/m² spec the entire screen assembly must be swapped.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



