ATPAZDB
ATPAZDB B140HAN03.2HW0A 14 inch FHD 1920x1080 IPS 30 Pins 60Hz laptop screen
A 14 inch Full HD IPS laptop replacement screen with 1920x1080 resolution, 30-pin connector, 60Hz refresh rate, 300 cd/m² brightness and 800:1 contrast ratio
- Compatible ModelsB140HAN03.2HW0A
- Screen Size14 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp Full HD detail on a 14 inch IPS panel
- Wide viewing angles with 1920x1080 resolution
- Bright 300 cd/m² output for clear visibility
- Standard 60Hz refresh handles everyday tasks
- Direct fit via 30 pin connector for B140HAN03.2HW0A
14-inch FHD IPS replacement panel
This 14-inch Full HD IPS panel replaces a damaged or dim screen in compatible laptops. It delivers a 1920x1080 resolution with a 60Hz refresh rate and 300 cd/m² brightness. The matte IPS surface provides wide viewing angles for everyday work and media. A 30-pin video connector matches the original part exactly.
Buyers needing a direct 30-pin FHD swap
Installers with a B140HAN03.2HW0A part number will find a mechanical and electrical match. Touch-screen models, higher refresh-rate panels, or displays using 40-pin or 50-pin connectors are not compatible. Anyone requiring touch input or a different pin layout should source the correct variant for their chassis.
30-pin video signal connector
The panel uses a 30-pin eDP interface that must match the laptop's cable and motherboard header. Verifying this exact pin count against the original screen is the single step that confirms fitment. A different pin configuration will prevent the display from functioning.
Highlights
- Sharp Full HD detail on a 14 inch IPS panel
- Wide viewing angles with 1920x1080 resolution
- Bright 300 cd/m² output for clear visibility
- Standard 60Hz refresh handles everyday tasks
- Direct fit via 30 pin connector for B140HAN03.2HW0A
Specifications
| Part Number | B140HAN03.2HW0A |
|---|---|
| Compatible Models | B140HAN03.2HW0A |
| Screen Size | 14 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
Will this 14 inch 30-pin panel plug straight into the existing 30-pin eDP cable in my laptop?
Yes — the panel uses a 30-pin video signal connector, so it connects directly to a matching 30-pin eDP cable without an adapter.
Can I keep my current 60 Hz display driver and BIOS settings when swapping to this 60 Hz IPS screen?
The screen runs at 60 Hz, the same refresh rate as the original panel, so existing driver and BIOS settings remain valid.
After fitting the panel, how do I confirm it is delivering the specified 1920x1080 image at 300 cd/m²?
Set the OS resolution to 1920x1080 at 60 Hz; a hardware colorimeter can then verify the 300 cd/m² brightness and 800:1 contrast ratio.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



