ATPAZDB
ATPAZDB B133HAT04.3 13.3" FHD 1920x1080 30-pin touch laptop screen
13.3 inch Full HD touch panel with 30-pin connector, 255 cd/m² brightness and 60 Hz refresh rate
- Compatible ModelsB133HAT04.3
- Screen Size13.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp 1920x1080 visuals on a 13.3 inch Full HD panel
- Responsive touch control with 30-pin video connector
- Smooth 60Hz refresh for everyday tasks
- 255 cd/m² brightness for clear indoor viewing
- 800:1 contrast adds depth to images
Direct replacement panel
This 13.3 inch display carries the exact B133HAT04.3 part number and a 30-pin video connector. It restores Full HD 1920x1080 resolution with touch input on compatible laptops. The panel arrives new and ready for installation.
Brightness and power profile
Rated brightness reaches 255 cd/m² with an 800:1 contrast ratio at a 60Hz refresh rate. The slim 13.3 inch form factor draws modest power and produces minimal heat during typical office or media use. Silent operation is inherent with no moving parts.
Upgrade from damaged or lower-spec screens
It replaces a cracked, dim or non-touch panel of the same part number. The jump is worth it when the original screen has failed or lacks touch capability. Buyers needing a different connector count, higher refresh rate or larger diagonal should look elsewhere.
Highlights
- Sharp 1920x1080 visuals on a 13.3 inch Full HD panel
- Responsive touch control with 30-pin video connector
- Smooth 60Hz refresh for everyday tasks
- 255 cd/m² brightness for clear indoor viewing
- 800:1 contrast adds depth to images
Specifications
| Part Number | B133HAT04.3 |
|---|---|
| Compatible Models | B133HAT04.3 |
| Screen Size | 13.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
How do I connect the 30-pin video cable without damaging the connector?
Align the 30-pin cable squarely with the panel socket, insert straight in until it seats, then flip the locking bar down; forcing it at an angle bends the fragile pins.
Will the touch digitiser need recalibration or replacement after the screen swap?
The touch layer is bonded to the 13.3 inch panel, so replacing the whole B133HAT04.3 unit restores touch function without separate digitiser work or recalibration.
At 255 cd/m² brightness, will the panel dim noticeably during long sessions?
Sustained output at 255 cd/m² is stable; the 60 Hz refresh and 800:1 contrast remain constant, so no automatic dimming occurs under normal indoor use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



