ATPAZDB
ATPAZDB B133HAT02.0 13.3" FHD 1920x1080 IPS Touch 30-Pin 60Hz laptop screen
A 13.3-inch Full HD IPS touchscreen with 30-pin connector, 60 Hz refresh rate and 330 cd/m² brightness
- Compatible ModelsB133HAT02.0
- Screen Size13.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Crisp 1920x1080 Full HD detail on a 13.3 inch IPS panel
- Wide viewing angles from IPS technology for consistent colour
- Responsive 10-point touch input on the 30-pin connector
- Bright 330 cd/m² output suits indoor and outdoor use
- Smooth 60 Hz refresh keeps motion clear for video and work
13.3" FHD IPS touch panel
This 13.3 inch replacement screen delivers a 1920x1080 resolution on an IPS panel with 330 cd/m² brightness and a 700:1 contrast ratio. It operates at a 60Hz refresh rate and connects via a 30-pin video signal connector. The unit includes integrated touch functionality.
Touch-equipped 30-pin upgrade
This panel suits owners of laptops built around the B133HAT02.0 part number who need a direct swap with touch support. It is not for machines that require a non-touch variant, a different pin count, or a higher refresh rate.
30-pin connector compatibility
The single specification that decides fit is the 30-pin video signal connector matched to the B133HAT02.0 part number. Verify this exact connector and part number on the original screen before ordering.
Highlights
- Crisp 1920x1080 Full HD detail on a 13.3 inch IPS panel
- Wide viewing angles from IPS technology for consistent colour
- Responsive 10-point touch input on the 30-pin connector
- Bright 330 cd/m² output suits indoor and outdoor use
- Smooth 60 Hz refresh keeps motion clear for video and work
Specifications
| Part Number | B133HAT02.0 |
|---|---|
| Compatible Models | B133HAT02.0 |
| Screen Size | 13.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
What does the 30-pin connector support on the B133HAT02.0?
The 30-pin video signal connector carries the Full HD 1920x1080 signal at 60Hz to the IPS touch panel.
What physical space does the 13.3-inch B133HAT02.0 need to fit?
The panel matches a 13.3-inch chassis cut-out and uses the standard 30-pin ribbon routing for that form factor.
How is the B133HAT02.0 installed, and what step is often missed?
Disconnect power and battery, remove the bezel, swap the 30-pin cable into the matching socket, then test before reassembly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



