ATPAZDB
ATPAZDB B133HAN06.1 laptop screen 13.3" FHD 1920x1080 IPS 60Hz 30-pin
A 13.3 inch IPS panel with 1920x1080 resolution, 60Hz refresh, 250 cd/m² brightness and a 30-pin connector
- Compatible ModelsB133HAN06.1
- Screen Size13.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp Full HD detail from 1920x1080 resolution
- Wide viewing angles with 13.3 inch IPS panel
- Smooth 60Hz refresh for everyday tasks
- Bright 250 cd/m² output for indoor use
- Direct 30-pin fit for B133HAN06.1 models
Compatible 13.3-inch FHD IPS panel
This replacement display matches part number B133HAN06.1 and fits laptops designed for that exact panel. It delivers a 1920x1080 resolution on a 13.3-inch IPS matrix with a 60Hz refresh rate and 250 cd/m² brightness. The 30-pin video connector ensures a direct fit without adapter cables. Buyers receive a new panel ready for installation in compatible chassis.
Suitable for single-panel repairs only
This screen serves technicians and owners replacing a damaged B133HAN06.1 unit in a non-touch configuration. It does not support touch input, so devices requiring a digitiser layer cannot use this part. Laptops with a different connector pin-count, a higher refresh-rate requirement, or a different physical size should look elsewhere.
30-pin video connector decides fit
The panel uses a 30-pin signal interface that must match the laptop's cable and motherboard header exactly. Verify the original screen's part number is B133HAN06.1 before ordering, as other 13.3-inch FHD panels may use 40-pin or 50-pin connectors. A mismatched pin-count will prevent the display from functioning.
Highlights
- Sharp Full HD detail from 1920x1080 resolution
- Wide viewing angles with 13.3 inch IPS panel
- Smooth 60Hz refresh for everyday tasks
- Bright 250 cd/m² output for indoor use
- Direct 30-pin fit for B133HAN06.1 models
Specifications
| Part Number | B133HAN06.1 |
|---|---|
| Compatible Models | B133HAN06.1 |
| Screen Size | 13.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
What does the 30-pin video connector limit for this B133HAN06.1 panel?
The 30-pin connector carries the Full HD 1920x1080 signal at 60 Hz; it does not support higher resolutions or refresh rates.
What physical space and mounting points does the 13.3-inch B133HAN06.1 screen require?
It fits a 13.3-inch chassis cut-out and uses the standard screw-hole pattern for the B133HAN06.1 model.
How is the B133HAN06.1 display installed, and which step is often missed?
Disconnect the battery, remove the bezel, swap the panel, reconnect the 30-pin cable firmly, then reassemble; the step most often missed is fully seating the 30-pin connector before locking the latch.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



