ATPAZDB
ATPAZDB B133HAN05.7 13.3" FHD 1920x1080 IPS 60Hz 30-pin laptop screen
A 13.3 inch IPS laptop replacement panel with Full HD 1920x1080 resolution, 60Hz refresh rate, 400 cd/m² brightness, 1500:1 contrast and a 30-pin connector
- Compatible ModelsB133HAN05.7
- Screen Size13.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Full HD 1920x1080 resolution gives sharp detail
- IPS panel provides wide viewing angles
- 400 cd/m² brightness suits bright environments
- 1500:1 contrast ratio produces deep blacks
- 30-pin connector matches B133HAN05.7 exactly
Direct-fit 13.3" FHD IPS panel
This ATPAZDB B133HAN05.7 replacement screen matches the original part number exactly. It delivers a 13.3 inch Full HD 1920x1080 IPS image at 60Hz with a 30-pin video connector. The panel is supplied new and ready for installation.
Suitable for single-panel FHD repairs only
Technicians restoring a laptop that uses the B133HAN05.7 panel will find the correct fit, brightness of 400 cd/m² and 1500:1 contrast. This part does not support touch input, higher refresh rates, or different connector pin counts. Buyers whose device requires a touch layer, a different resolution, or an alternative pin layout must source a different screen.
30-pin connector decides compatibility
The 30-pin video signal connector is the single specification that determines whether this panel will work. Verify the original screen uses an identical 30-pin interface before ordering; a mismatched connector will prevent installation.
Highlights
- Full HD 1920x1080 resolution gives sharp detail
- IPS panel provides wide viewing angles
- 400 cd/m² brightness suits bright environments
- 1500:1 contrast ratio produces deep blacks
- 30-pin connector matches B133HAN05.7 exactly
Specifications
| Part Number | B133HAN05.7 |
|---|---|
| Compatible Models | B133HAN05.7 |
| Screen Size | 13.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
How do I align the 30-pin video connector when installing this B133HAN05.7 screen?
Insert the 30-pin cable straight into the panel socket until the latch clicks; forcing it at an angle bends pins and causes no image or flicker.
What component typically fails first on this 13.3 inch IPS panel after extended use?
The LED backlight dims gradually; at 400 cd/m² initial brightness you may notice reduced luminance after several years of daily operation.
At what point does the 60Hz refresh rate become the limiting factor during sustained use?
In fast-panning video or gaming, motion blur appears once frame rates exceed 60 fps because the panel cannot update faster than 60Hz.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



