ATPAZDB
ATPAZDB B133HAN02.3 13.3" FHD 1920x1080 60Hz 30-pin laptop screen
A 13.3 inch Full HD 1920x1080 laptop replacement screen with 30-pin connector, 60Hz refresh rate, 400 cd/m² brightness and 700:1 contrast
- Compatible ModelsB133HAN02.3
- Screen Size13.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp 1920×1080 detail on a 13.3 inch panel
- Bright 400 cd/m² output for clear indoor viewing
- 700:1 contrast adds depth to text and images
- Smooth 60 Hz refresh keeps motion fluid
- 30-pin connector matches B133HAN02.3 exactly
Compatible replacement panel
The ATPAZDB B133HAN02.3 is a new 13.3 inch laptop replacement screen built to match the original part number exactly. It targets owners of devices that shipped with this specific panel and need a direct swap without adapter boards or firmware changes.
1920x1080 60 Hz capacity
The Full HD resolution delivers 1920x1080 pixels at a 60 Hz refresh rate, suitable for everyday office work, web browsing and video playback. A brightness of 400 cd/m² and 700:1 contrast ratio provide adequate indoor visibility, though high-glare outdoor use or colour-critical grading will exceed the panel’s headroom.
30-pin connector and non-touch build
The panel uses a 30-pin video signal connector and omits a touch layer, so installation follows the standard cable routing for this chassis. The slim 13.3 inch form factor fits the original bezel and mounting points, keeping hinge clearance and lid sensors unchanged.
Highlights
- Sharp 1920×1080 detail on a 13.3 inch panel
- Bright 400 cd/m² output for clear indoor viewing
- 700:1 contrast adds depth to text and images
- Smooth 60 Hz refresh keeps motion fluid
- 30-pin connector matches B133HAN02.3 exactly
Specifications
| Part Number | B133HAN02.3 |
|---|---|
| Compatible Models | B133HAN02.3 |
| Screen Size | 13.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
Will the 30-pin connector on this B133HAN02.3 panel match the cable already in my laptop?
Yes, this panel uses a 30-pin video signal connector that matches the original B133HAN02.3 specification, so it plugs directly into the existing cable without an adapter.
How can I confirm the screen is running at its native 1920x1080 resolution and 60Hz refresh rate after installation?
Open the display settings in your operating system and verify the resolution is set to 1920x1080 at 60Hz; the panel will also show a brightness of 400 cd/m² and a 700:1 contrast ratio when displaying a test pattern.
Does the box include mounting brackets, bezel clips or any tools, or must I reuse the parts from my old screen?
The replacement panel is supplied as the bare 13.3-inch display only; you will need to transfer the original brackets, bezel and any screws from the removed screen.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



