We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black polyurethane tubing coil, 100 feet length, 1/4 inch inner diameter

Atp

Atp PU38-ABLK Drain Trap Black 100 ft 1/4 in ID 3/8 in OD 150 psi 140 °F Shore A 98

SKU CH-FG0F-Q7H43 MPN PU38-ABLK

Black polyurethane drain tubing with 1/4 in ID, 3/8 in OD, 100 ft length, 150 psi rating, and Shore A 98 hardness

  • TypeDrain Components
  • ColorBlack
  • 100 ft continuous length reduces joints
  • 150 psi rating handles demanding pressure tasks
  • 140 °F max temperature suits hot-fluid lines
  • Shore A 98 hardness resists abrasion and wear
  • 1/4 in ID by 3/8 in OD fits standard fittings

Drain Trap Tubing 100 ft 1/4 in ID

This polyurethane drain trap tubing runs 100 feet with a 1/4 inch inside diameter and 3/8 inch outside diameter. The black tubing is rated for air and water use at up to 150 psi and 140 degrees Fahrenheit. It suits maintenance teams and facility managers who need a long, flexible line for drainage or fluid transfer.

Pressure and Temperature Limits

The tubing handles a maximum operating pressure of 150 psi and a maximum temperature of 140 degrees Fahrenheit. Shore A 98 hardness gives it a firm feel that resists kinking but limits tight bend radii. Peristaltic pump compatibility is not supported, so it cannot be used in roller-pump dosing or metering setups.

Abrasion-Resistant Build and Daily Handling

Polyurethane construction provides abrasion and wear resistance for rough routing across floors or through cable trays. The lack of a jacket means the outer surface contacts surfaces directly, so sharp edges can score the tube over time. Black colour helps hide grime in industrial environments. California Proposition 65 warnings apply for cancer and reproductive harm.

Highlights

  • 100 ft continuous length reduces joints
  • 150 psi rating handles demanding pressure tasks
  • 140 °F max temperature suits hot-fluid lines
  • Shore A 98 hardness resists abrasion and wear
  • 1/4 in ID by 3/8 in OD fits standard fittings

Specifications

TypeDrain Components
ColorBlack
BrandATP
ModelPU38-ABLK

Questions about this item

Should I pick the 100 ft length or a shorter roll for my plumbing setup?

The 100 ft roll gives you a single continuous run of 1/4 in ID polyurethane tubing; cut it to the exact lengths you need for each drain line and keep the remainder on the spool for future repairs.

What does the 150 psi rating mean when the tubing is carrying hot water at 140 °F?

At 140 °F the polyurethane retains its 150 psi maximum operating pressure, so the tube will not burst or permanently deform as long as system pressure stays at or below that figure.

How does the 3/8 in OD and Shore A 98 hardness affect fitting choice?

The 3/8 in outside diameter matches standard 3/8 in push-to-connect or barbed fittings, while the Shore A 98 hardness keeps the tube rigid enough to resist kinking yet flexible enough to seat fully without leaking.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.