We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green polyurethane tubing coil 1/4 inch OD 100 ft length

Atp

Atp PU14AG polyurethane drain trap 1/4 in OD 100 ft green

SKU CH-NS5V-ZR9P3 MPN PU14AG

Polyurethane drain tubing with a 1/4 in outside diameter, 100 ft length and 180 psi maximum pressure rating

  • TypeDrain Components
  • ColorGreen
  • 100 ft continuous length reduces joints
  • 180 psi working pressure handles demanding systems
  • Polyurethane construction resists abrasion and kinking
  • 68 °F to 140 °F range suits extreme environments
  • 28 in Hg vacuum rating prevents collapse under suction

Polyurethane tubing for fluid lines

This green polyurethane tube has a 1/4 inch outside diameter and a 5/32 inch inside diameter with a 3/64 inch wall thickness. It is supplied in a 100 foot coil and rated for 180 psi maximum pressure and 28 in Hg vacuum. The material carries a Shore A 98 hardness and operates from -68 to 140 degrees F.

Suited for pneumatic and low-pressure liquid

Installers who need flexible, abrasion-resistant tubing for air, water or inert gas lines will find this specification matches standard push-to-connect fittings. Systems that require higher temperature resistance, larger bore sizes or chemically incompatible fluid transfer should look at alternative materials.

1/4 inch outside diameter with 180 psi rating

The combination of 1/4 inch OD and 180 psi working pressure determines fitting compatibility and system safety margins. Verify that your connectors and operating conditions align with these dimensions before purchase.

Highlights

  • 100 ft continuous length reduces joints
  • 180 psi working pressure handles demanding systems
  • Polyurethane construction resists abrasion and kinking
  • 68 °F to 140 °F range suits extreme environments
  • 28 in Hg vacuum rating prevents collapse under suction

Specifications

TypeDrain Components
ColorGreen
BrandATP
ModelPU14AG

Questions about this item

Which length should I choose for a typical workshop run?

The tubing comes in a 100 ft coil so you can cut the exact length you need for each drain line.

What does the 180 psi burst rating mean when the line is pressurised?

It indicates the tube can withstand a momentary surge up to 180 psi before rupturing; design your system with a safety factor below that value.

How does the 1/4 in outside diameter affect flow capacity?

The 1/4 in OD with a 5/32 in bore sets the maximum flow area; pressure drop will increase with length and fluid viscosity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.