We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear blue polyurethane tubing coil, half inch outside diameter, one hundred feet

Atp

Atp ATP-12CBA trap 1/2 in OD 100 ft polyurethane clear blue

SKU CH-PCNF-F5P7H MPN ATP-12CBA

Polyurethane tubing with 1/2 in outside diameter, 100 ft length, 150 psi max pressure and -68 to 140 °F temperature range

  • TypeDrain Components
  • ColorClear Blue
  • Clear blue tint lets you spot flow issues fast
  • Polyurethane wall resists kinks and abrasion over long runs
  • 150 psi rating handles demanding pneumatic and fluid lines
  • Operates from -68 °F to 140 °F for extreme environments
  • Tight ±.007 in tolerance ensures consistent push-fit connections

Purpose and Fit

The ATP-12CBA is a 100 ft coil of clear blue polyurethane tubing with a 1/2 in outside diameter and 21/64 in inside diameter. It suits fluid-handling tasks where moderate pressure and a wide temperature span are required.

Pressure and Temperature Limits

The tube is rated for a maximum working pressure of 150 psi and a burst pressure of 150 psi. It remains functional across a range of -68 to 140 degrees F, making it viable for both cold and warm environments.

Capacity and Headroom

At 100 ft the roll provides ample length for extended runs or multiple shorter cuts. The 3/32 in wall and +/- .007 in tolerance keep flow consistent, though the 150 psi ceiling limits use in high-pressure hydraulic circuits.

Highlights

  • Clear blue tint lets you spot flow issues fast
  • Polyurethane wall resists kinks and abrasion over long runs
  • 150 psi rating handles demanding pneumatic and fluid lines
  • Operates from -68 °F to 140 °F for extreme environments
  • Tight ±.007 in tolerance ensures consistent push-fit connections

Specifications

TypeDrain Components
ColorClear Blue
BrandATP
ModelATP-12CBA

Questions about this item

Should I pick the 1/2 in OD clear blue polyurethane in the 100 ft length?

The 100 ft coil of 1/2 in OD polyurethane gives you a single continuous run for long drain lines; cut to the exact lengths you need on site.

What does the 150 psi burst pressure mean once the tubing is installed?

The 150 psi burst rating is the laboratory failure point; design your system well below that value and stay within the 150 psi maximum working pressure.

What standard governs the 1/2 in outside diameter and 3/32 in wall thickness?

The tubing is made to a +/- 0.007 in tolerance on the 1/2 in OD and 3/32 in wall, so it fits standard push-to-connect and barb fittings sized for 1/2 in OD.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.