ATEN
ATEN US3344I 4x4 USB 3.2 Gen 1 Industrial Hub Switch 2 in 1 accessory
Lets four computers share four USB 3.2 Gen 1 devices with remote or RS-422/RS-485 port selection and automatic focus switching
- Share four USB 3.2 Gen 1 devices across four computers
- Switch ports instantly with remote controller or RS-422/RS-485 terminal block
- Works with Windows, Mac and Linux via USB Type-A
- Auto-switches focus to newly connected or powered-on computer
- Reduces cost by removing redundant per-computer equipment
Industrial 4×4 USB 3.2 Hub Switch
The ATEN US3344I lets four computers share four USB 3.2 Gen 1 peripherals through a single industrial-grade hub switch. It is aimed at operators who need to control multiple workstations from one set of keyboards, mice, storage drives or other USB devices without unplugging cables.
Check host ports and control method
Each connected computer must provide a USB Type-A host port. Port switching can be triggered by the included remote controller or by sending commands over an RS-422 or RS-485 link wired to the 5-pin terminal block. Verify that your control system can drive one of these interfaces before ordering.
Passive thermal design and bus power
The unit has no fans and relies on passive cooling, so it runs silently in normal operation. Power for the hub circuitry is drawn from the attached USB hosts, and the switching logic activates automatically when a computer is connected or powered on, returning focus to the first port when the active host is removed.
Highlights
- Share four USB 3.2 Gen 1 devices across four computers
- Switch ports instantly with remote controller or RS-422/RS-485 terminal block
- Works with Windows, Mac and Linux via USB Type-A
- Auto-switches focus to newly connected or powered-on computer
- Reduces cost by removing redundant per-computer equipment
Specifications
No published specifications for this item yet.
Questions about this item
What accessories are included with the ATEN US3344I and is anything else required?
The package includes a mounting kit, a remote port selector and a terminal block adapter set. A USB Type-A host connection on each computer is required for operation.
Which version of the ATEN US3344I should I choose for industrial control integration?
The single model US3344I provides both a remote controller and a 5-pin terminal block for RS-422 or RS-485 linking, covering both selection methods in one unit.
What does the USB 3.2 Gen 1 rating mean when the switch is connected to four computers?
Each of the four shared USB devices can run at up to 5 Gbps bandwidth per computer, and the switch routes the active connection without reducing the Gen 1 speed.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
