We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with metal bracket and two RJ45 ports

ASUS

ASUS PEB-10G/57840-2T 10Gbps Dual Port PCIe 3.0 x8 network card

SKU CH-9EK3-JTNXY

Adds dual 10 Gbps RJ45 Ethernet ports over a PCIe 3.0 x8 slot for high-throughput server networking

  • Speed10Gbps
  • Connectors1 x RJ45
  • InterfacePCI-Express
  • Dual-port 10Gbps throughput for high-bandwidth server workloads
  • PCIe 3.0 x8 interface provides ample lane bandwidth
  • Single RJ45 connector simplifies copper cabling
  • Plug-in card form factor fits standard server slots
  • ASUS engineering targets reliable Ethernet server adapter performance

10Gbps Dual-Port Server Adapter

The ASUS PEB-10G/57840-2T is a plug-in network card designed for servers and workstations that require wired 10Gbps Ethernet connectivity. It installs into an available PCI Express 3.0 x8 slot and presents a single RJ45 connector for copper cabling. This adapter targets IT professionals upgrading existing rackmount or tower systems.

PCI Express 3.0 x8 interface requirement

The card operates over a PCI Express 3.0 x8 electrical connection, so the host system must provide a compatible slot with sufficient lane allocation. Verify that the motherboard or riser can deliver x8 bandwidth; an x4 or x1 slot will limit throughput or prevent operation. No other bus standard or connector type is supported by this hardware.

Suits copper-based 10GbE deployments

This adapter suits administrators deploying 10Gbps links over existing Cat6a or Cat7 copper infrastructure where SFP+ fibre modules are not required. It is not for environments needing multiple physical ports beyond the single RJ45 provided, nor for systems lacking a full-size PCIe 3.0 x8 slot. Buyers requiring fibre connectivity or additional ports should consider alternative models.

Highlights

  • Dual-port 10Gbps throughput for high-bandwidth server workloads
  • PCIe 3.0 x8 interface provides ample lane bandwidth
  • Single RJ45 connector simplifies copper cabling
  • Plug-in card form factor fits standard server slots
  • ASUS engineering targets reliable Ethernet server adapter performance

Specifications

BrandASUS
Part NumberPEB-10G/57840-2T
Speed10Gbps
Connectors1 x RJ45
InterfacePCI-Express

Questions about this item

What does the 10Gbps rating mean for actual file transfers?

Each port can move up to ten gigabits per second, so large sequential reads and writes run near wire speed on a matching switch and cabling.

What does the PCIe 3.0 x8 interface limit in practice?

The eight-lane Gen 3 link provides enough bandwidth for both 10Gbps ports simultaneously without saturating the bus.

What slot and bracket space does the card need to install?

It requires a PCI Express x8 or wider slot and one rear-panel opening for its RJ45 connector.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.