Astro Gaming
Astro Gaming MokerLink Outdoor 3 Port Gigabit PoE Extender IEEE 802.3 af/at/bt 2 in 1 Accessory
Outdoor IP67 PoE extender with one input and two gigabit outputs delivering up to 90 W over 100 metres
- Extends PoE reach to 100 metres with gigabit data speeds
- IP67 rated metal housing protects against water, dust and snow
- Delivers up to 90 W input and 60 W plus 30 W output across three ports
- Plug-and-play operation requires no configuration or extra power adapter
- Supports three-level cascading for multiple cameras, access points or phones
Outdoor Gigabit PoE Extender
This extender provides three Gigabit PoE ports with one input and two outputs, supporting IEEE 802.3 af/at/bt standards. It extends network and power transmission up to 100 metres without requiring a separate power adapter. The unmanaged design enables plug-and-play operation for quick deployment.
IP67 Rated Outdoor Installations
The rugged metal housing and waterproof caps make this unit suitable for outdoor environments such as yards, garages, and warehouses. It supports wall mounting and three-level cascading for connecting multiple PoE devices like cameras or access points. Buyers needing managed switching features or indoor-only plastic enclosures should consider other options.
PoE Power Budget and Pinout
Verify that your PoE source can supply up to 90 W at 44-57 Vdc to utilise the full input capacity. Ensure connected devices match the output limits of 60 W on port one and 30 W on port two. Confirm cable pin assignments align with the 1/2 (+), 3/6 (-), 4/5 (+), 7/8 (-) configuration before installation.
Highlights
- Extends PoE reach to 100 metres with gigabit data speeds
- IP67 rated metal housing protects against water, dust and snow
- Delivers up to 90 W input and 60 W plus 30 W output across three ports
- Plug-and-play operation requires no configuration or extra power adapter
- Supports three-level cascading for multiple cameras, access points or phones
Specifications
No published specifications for this item yet.
Questions about this item
What PoE source do I need to power the MokerLink extender's 90 W input?
You need a PoE injector or switch that delivers up to 90 W over IEEE 802.3 bt at 44–57 Vdc on pins 1/2 (+), 3/6 (–), 4/5 (+), 7/8 (–).
Will my older IEEE 802.3 af or at cameras work with the two PoE outputs?
Yes, both outputs are backward compatible; port 1 supplies up to 60 W bt and port 2 up to 30 W at, so af and at devices will negotiate and power up normally.
How can I confirm the extender is passing data and power after I mount it outdoors?
Check that the link LEDs on each port show a 10/100/1000 Mbps connection and that the attached cameras or APs boot and stream video within the 100 m cable limit.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
