We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Right-angled M12 X-coded plug to RJ45 on thick shielded cable 20m

Astro Gaming

Astro Gaming 2 in 1 Accessory 20m

SKU CH-34G8-W2WA4

Industrial Ethernet cable with M12 X-coded and RJ45 connectors for machine vision sensors and automation networks, 20 metres

  • High-flex CMX jacket survives repeated motion and outdoor exposure
  • Double-shielded construction blocks EMI for reliable gigabit throughput
  • IP68-rated M12 X-code connectors seal against water and dust ingress
  • 20 metre length reaches distant sensors without extra couplers
  • Compatible with Cognex, Keyence, Basler and other vision systems

Industrial Gigabit Ethernet Cable

This 20 metre M12 X-coded to RJ45 cable carries CAT 6A gigabit data for Cognex DataMan and In-Sight vision sensors as well as Basler, Keyence, Datalogic and SICK devices. The right-angled M12 male plug fits tight machine-vision mounts while the RJ45 end connects to PC hosts, PLCs, routers or PoE injectors. Double-shielded CMX outdoor jacket and IP68 connectors survive vibration, moisture and temperature extremes in automation cells.

Target Automation Engineers, Not General IT

Engineers wiring EtherNet/IP, PROFINET or EtherCAT vision systems on robots, conveyors or outdoor LED displays will use the 65.6 foot length and high-flex construction daily. Installers needing straight M12 plugs, shorter patch cords or fibre uplinks should look at other cable assemblies. The fixed 20 m run also rules out applications requiring custom cut lengths or panel-mount bulkhead connectors.

M12 X-Coded 8-Pin Right-Angle Connector

The single specification that decides fit is the right-angled M12 X-coded 8-pin male connector mated to a standard RJ45 plug. Verify the sensor port accepts this exact keying and orientation before ordering; a straight or A-coded M12 will not seat and will break the gigabit link.

Highlights

  • High-flex CMX jacket survives repeated motion and outdoor exposure
  • Double-shielded construction blocks EMI for reliable gigabit throughput
  • IP68-rated M12 X-code connectors seal against water and dust ingress
  • 20 metre length reaches distant sensors without extra couplers
  • Compatible with Cognex, Keyence, Basler and other vision systems

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the cable is delivering the full CAT 6A performance after installation?

Verify the link negotiates at 1 Gbps or higher on both the PLC and the vision sensor, then run a cable certifier to confirm the channel meets the EIA/TIA 568B CAT 6A limits for the full 20 m run.

What connectors and cable length are included, and is any other hardware required?

The assembly includes an M12 X-coded 8-pin right-angled male connector on one end and an RJ45 plug on the other, built on a 20 m double-shielded CMX cable; no additional couplers or adapters are needed for a direct sensor-to-network link.

Which part number should I select for a Cognex DataMan 380 reader at a 20 m distance?

Choose part number CCB-84901-2002-xx, which is specified for the DataMan 380 and provides the required 20 m / 65.6 ft reach with the correct M12 X-coded to RJ45 pinout.

New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.

More in 2 in 1 Accessories

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.