Astro Gaming
Astro Gaming 2 in 1 Accessory 12 Fiber SC/A 900um Corning SMF-28 Singlemode 9/125um OS1/OS2
Twelve colour-coded single-mode pigtails with SC/APC ceramic ferrules, Corning SMF-28 Ultra 9/125 µm fibre, OS1/OS2 compatible, riser OFNR jacket, tested insertion loss .3 dB and return loss 65 dB
- Low insertion loss with 0.2 dB UPC and 0.3 dB APC performance
- High return loss reaching 50 dB UPC and 65 dB APC for signal integrity
- Corning SMF-28 Ultra fiber meets ITU-T G.652D and exceeds G.657.A1 bend standards
- 12 colour-coded 900 µm tight-buffer fibres simplify identification and deployment
- Ceramic ferrules and OFNR riser jacket tested across -20 °C to +70 °C operating range
Professional Fiber Connectivity
This 12-fiber singlemode pigtail kit uses Corning SMF-28 Ultra fiber with a 9/125 µm core and SC/APC connectors. It is built for installers and network engineers deploying OS1/OS2 links in FTTH, metro or long-haul environments. The 900 µm tight-buffer jacket carries an OFNR riser rating and operates from -20 °C to +70 °C.
Suited For Splicing And Patching
The color-coded 1-meter tails simplify channel identification during fusion splicing or patch-panel termination. Each ceramic ferrule is factory tested with insertion loss of .2 dB (UPC) or .3 dB (APC) and return loss of 50 dB (UPC) or 65 dB (APC). Buyers who need pre-terminated multi-fiber assemblies with MPO connectors or rugged outdoor cable should look at something else.
Ready To Install Without Extra Parts
The pack includes twelve individually tested pigtails in a single bundle, eliminating the need to order separate connectors, ferrules or polishing supplies. Compliance with ITU-T G.652D and G.657.A1 ensures the fiber splices identically to existing plant while exceeding macro-bend performance. No software, tools or additional hardware are bundled.
Highlights
- Low insertion loss with 0.2 dB UPC and 0.3 dB APC performance
- High return loss reaching 50 dB UPC and 65 dB APC for signal integrity
- Corning SMF-28 Ultra fiber meets ITU-T G.652D and exceeds G.657.A1 bend standards
- 12 colour-coded 900 µm tight-buffer fibres simplify identification and deployment
- Ceramic ferrules and OFNR riser jacket tested across -20 °C to +70 °C operating range
Specifications
No published specifications for this item yet.
Questions about this item
Which patch panels or splice trays accept the SC/APC connectors on these 12-fiber pigtails?
Any standard SC/APC bulkhead or splice tray will mate with the ceramic ferrules; the 900 µm tight-buffer jacket fits typical fusion-splice organizers and rack-mount panels.
Can I fusion-splice these Corning SMF-28 Ultra fibers to legacy G.652.D cable already in my plant?
Yes — the SMF-28 Ultra fiber splices identically to standard single-mode fiber and is fully backward-compatible with the installed G.652.D base.
What insertion-loss and return-loss readings confirm the SC/APC ends are performing to spec after termination?
Measure ≤ 0.3 dB insertion loss and ≥ 65 dB return loss at 1310 nm or 1550 nm; those are the factory-tested limits for the APC connectors.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
