We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 2.8 oz tube of high-temperature RTV silicone adhesive

ASI

ASI ASI600RTV High-Temperature RTV Silicone Adhesive 2.8 oz Red 600°F

SKU CH-9ABF-R6EWC MPN ASI600RTV

High-temperature RTV silicone forms flexible gaskets up to 600°F in a 2.8 oz tube

  • TypeGlue
  • FeaturesUniversal
  • ColorRed
  • Sizes/Dimensions2.8 oz

Sizes/Dimensions 2.8 oz

  • 2.8 oz
  • 10.2 Oz

Struck-through versions exist but are not stocked here.

  • Withstands 600 °F intermittent heat for demanding gasket jobs
  • Stays permanently flexible to resist aging, vibration and shock
  • Ready to use with no mixing — ¼ in bead cures in 24 hrs
  • Food-contact safe per MIL-46106 Type 1, FDA and USDA
  • 8 oz tube suits automotive, industrial and appliance sealing

High-Temperature RTV Silicone Adhesive

ASI ASI600RTV is a one-part, moisture-curing red silicone sealant supplied in a 2.8 oz tube. It is formulated for formed-in-place gaskets where operating temperatures reach 600°F (310°C) intermittently. The compound remains permanently flexible and resists aging, vibration and shock. It meets MIL-46106 Type 1, FDA and USDA requirements for food contact safety.

Formed-In-Place Gasket For Automotive

The sealant replaces conventional paper or cork gaskets on valve covers, axle housings, water and oil pump seals, thermostat housings and timing chain covers. It also serves industrial pump and compressor gaskets, appliance door gaskets, furnace door gaskets and ductwork. No mixing or additives are required; the material is ready to use directly from the tube.

Cure Time And Thermal Performance

A 1/4-inch bead cures within 24 hours at room temperature. The cured rubber withstands intermittent exposure to 600°F while maintaining a flexible seal. The product contains no solvents that would shrink or degrade the bond under thermal cycling. Power draw and fan noise are not applicable to this adhesive.

Highlights

  • Withstands 600 °F intermittent heat for demanding gasket jobs
  • Stays permanently flexible to resist aging, vibration and shock
  • Ready to use with no mixing — ¼ in bead cures in 24 hrs
  • Food-contact safe per MIL-46106 Type 1, FDA and USDA
  • 8 oz tube suits automotive, industrial and appliance sealing

Specifications

BrandASI
ModelASI600RTV
TypeGlue
FeaturesUniversal
ColorRed
Sizes/Dimensions2.8 oz

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How long does a 1/4-inch bead take to cure at room temperature?

A 1/4-inch bead cures within 24 hours once exposed to air moisture.

Does the sealant harden or stay flexible after repeated heating to 600°F?

It remains permanently flexible and resists aging, vibration and shock through thermal cycles.

What surface preparation is needed before applying this silicone?

Surfaces must be clean, dry and free of oil or old gasket material for proper adhesion.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.