Ashcroft
Ashcroft K17MO242C1300#XFM Pressure Transducer 0 to 300 psi
Pressure transmitter measures 0 to 300 psi with 4 to 20mA output and NEMA 4X enclosure
- TypeMicrometers
- 4–20 mA output suits long cable runs
- ±1 % full-scale accuracy for reliable readings
- NEMA 4X and IP67 ratings resist water and dust
- 20 °F to 180 °F operating range handles harsh environments
- 10–36 V DC supply works with common industrial power
Pressure Transmitter for 0–300 psi Systems
The Ashcroft K17MO242C1300#XFM is a pressure transmitter built for industrial monitoring across a 0 to 300 psi range. It delivers a 4 to 20mA DC output over a two-wire loop powered by 10 to 36V DC. The 1/4 in male NPT process connection suits standard pipe fittings. It is rated NEMA 4X and IP67 for harsh environments.
Interface Limits for 4–20mA Loop
The two-wire 4 to 20mA interface requires a compatible loop supply between 10 and 36V DC. Accuracy is specified at ±1 percent of full scale across the operating span. The 1/2 in MNPT conduit entry protects the cable and wire leads. Operation is guaranteed from -20 to 180 degrees F. Buyers needing voltage outputs, digital protocols or higher accuracy classes cannot use this transmitter.
Capacity Headroom up to 300 psi
The 300 psi upper range handles typical hydraulic and process pressures with margin below the sensor limit. The ±1 percent full-scale accuracy holds across the entire span. The NEMA 4X and IP67 ratings provide headroom against wash-down and immersion. Systems requiring ranges above 300 psi, wider temperature spans or certified hazardous-area approvals fall outside this model’s envelope.
Highlights
- 4–20 mA output suits long cable runs
- ±1 % full-scale accuracy for reliable readings
- NEMA 4X and IP67 ratings resist water and dust
- 20 °F to 180 °F operating range handles harsh environments
- 10–36 V DC supply works with common industrial power
Specifications
| Brand | ASHCROFT |
|---|---|
| Type | Micrometers |
Questions about this item
How do I pick the right K17MO242C1300#XFM for my 0 to 300 psi application?
The transducer is a single range model rated 0 to 300 psi with 4 to 20 mA output, 1/4 in male NPT process connection and 1/2 in MNPT conduit entry.
What does the 300 psi full scale mean for day to day readings?
Accuracy is ±1 percent of full scale, so the maximum error is ±3 psi across the entire 0 to 300 psi span.
What does the 4 to 20 mA loop require and what limits it?
It needs a 10 to 36 V DC supply on two wires and the loop voltage drop across the cable and receiver sets the practical maximum loop resistance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
