We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical nylon transducer with cable leads and male NPT fitting

Ashcroft

Ashcroft G17M0215F2100# Transducer 0 to 100 psi 1 to 5VDC

SKU CH-XCJJ-RV4B7

Pressure transducer measures 0 to 100 psi with 1 to 5 VDC output, ±0.50 % full-scale accuracy, 9 to 36 V DC supply, 1/4 in male NPT connection, NEMA 4X and IP67 rating, operating from -40 to 257 °F

  • TypeElectronic
  • Accurate readings within ±0.50 % full scale
  • 1–5 VDC output suits standard data-acquisition inputs
  • 9–36 VDC supply works with common industrial power
  • NEMA 4X and IP67 housing resists wash-down and immersion
  • Operates from −40 °F to 257 °F for harsh environments

Ashcroft G2 Pressure Transducer 0-100 psi

The Ashcroft G2 series transducer measures gauge pressure from 0 to 100 psi and outputs a 1 to 5 V DC signal proportional to the applied pressure. It operates on a 9 to 36 V DC supply and uses a three-wire electrical connection with cable leads. The sensor is housed in a nylon body rated NEMA 4X and IP67 for dust and water ingress protection.

Check supply voltage and process connection before

Verify that your system can provide a stable DC supply between 9 and 36 volts and that the signal input accepts a 1 to 5 V DC range. The process connection is a 1/4 inch male NPT thread; confirm the mating port size and thread type on your manifold or piping. Ensure the operating temperature range of -40 to 257 degrees Fahrenheit covers the intended environment.

Replaces transducers with lower accuracy or lesser

This unit upgrades from transmitters offering wider error bands than the stated ±0.50 percent full-scale accuracy. The jump is worthwhile when an application demands tighter pressure control or when the installation requires NEMA 4X and IP67 environmental sealing that earlier models lack. It is not suited for buyers who need a different pressure span or a non-voltage output type.

Highlights

  • Accurate readings within ±0.50 % full scale
  • 1–5 VDC output suits standard data-acquisition inputs
  • 9–36 VDC supply works with common industrial power
  • NEMA 4X and IP67 housing resists wash-down and immersion
  • Operates from −40 °F to 257 °F for harsh environments

Specifications

BrandASHCROFT
TypeElectronic

Questions about this item

What comes in the box with the G17M0215F2100# transducer and do I need to buy any cables separately?

The transducer ships with integral cable and wire leads, so no separate cable purchase is required for the electrical connection.

The part number includes 215 and 2100 — which version or capacity should I choose for a 0 to 100 psi range with 1 to 5 VDC output?

This specific part number is factory configured for 0 to 100 psi and 1 to 5 VDC output; select it when those exact parameters match your system requirements.

What does the ±0.50 % full-scale accuracy mean when the transducer is installed and powered from a 9 to 36 VDC supply?

At full scale the reading can deviate by up to half a percent of 100 psi, and the stated accuracy holds across the full 9 to 36 VDC supply range and -40 to 257 °F operating temperatures.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.