ARTU USA INC
ARTU USA INC 01213 SDS Plus Drill Bit 7/32" x 6.000"L
SDS Plus drill bit with a 7/32 inch diameter and 6.000 inch length for masonry and concrete drilling
- SDS Plus shank fits rotary hammers directly
- 7/32 inch diameter drills precise anchor holes
- 6 inch overall length reaches deeper fixtures
- ARTU brand built for professional trade use
- New condition ensures full cutting life
7/32" SDS Plus Bit for Rotary Hammers
This 7/32 inch SDS Plus drill bit measures 6.000 inches overall and is built for rotary hammers that accept the SDS Plus shank. It targets professionals and DIY users drilling anchor holes in concrete, brick or block where a 7/32 inch diameter is specified.
SDS Plus Shank Inserts Directly Into Compatible
The bit seats with a push-and-click action in any SDS Plus rotary hammer, so no separate chuck key or adapter is required. Problems usually arise when the bit is used in a standard three-jaw chuck or an SDS Max machine, both of which cannot grip the splined shank securely.
Carbide Tip Holds Diameter During Extended Drilling
Under sustained load in masonry the carbide tip resists wear so the 7/32 inch hole size stays consistent from the first hole to the last. In contrast, short bursts in soft material may feel easier but do not reveal the tip life needed for all-day anchor installation.
Highlights
- SDS Plus shank fits rotary hammers directly
- 7/32 inch diameter drills precise anchor holes
- 6 inch overall length reaches deeper fixtures
- ARTU brand built for professional trade use
- New condition ensures full cutting life
Specifications
| Brand | ARTU |
|---|
Questions about this item
How can I confirm the 7/32 inch SDS Plus bit is drilling correctly after installing it in my rotary hammer?
The bit should engage the SDS Plus chuck with a firm click, drill clean 7/32 inch holes at full depth, and show even flute wear without wobble or excessive heat during use.
What is included with the ARTU 01213 SDS Plus Drill Bit and what must I supply separately?
The package contains the single 7/32 inch by 6 inch SDS Plus drill bit; you must provide a compatible SDS Plus rotary hammer and any anchors or fasteners sized for the 7/32 inch hole.
Which ARTU SDS Plus bit length should I choose for a 6 inch drilling depth requirement?
Select the 01213 model with its 6.000 inch overall length when you need a 7/32 inch diameter hole at that exact depth; other lengths are offered under different part numbers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
