We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Aro

Aro 104500 pressure washer part 0 to 160 psi 2 in dial 1/8 in NPT center back

SKU CH-BGD0-XHWFF

A 2-inch commercial pressure gauge reading 0 to 160 psi with a 1/8-inch NPT center-back brass connection and ±3.00% accuracy

  • Accurate readings up to 160 psi with ±3.00 % precision
  • 2 in white dial gives clear visibility at a glance
  • 1/8 in NPT centre-back mount fits standard pressure-washer ports
  • Brass socket and bourdon-tube sensor resist corrosion in wet environments
  • Polycarbonate lens and plastic case withstand outdoor knocks and weather

Aro 104500 Pressure Gauge

The Aro 104500 is a commercial pressure gauge with a 2 in dial displaying 0 to 160 psi. It features a centre back 1/8 in NPT male brass connection and a polycarbonate lens. The black plastic case houses a bourdon tube sensor with +/- 3.00 percent accuracy.

Suits pressure washer monitoring

This gauge fits users needing a direct-mount, non-liquid-filled indicator for compatible fittings. It is not field-fillable and cannot be panel-mounted. Buyers who need a liquid-filled case for vibration damping or a panel-mountable design should look at something else.

Bourdon tube maintains steady reading under

The mechanical sensor responds consistently across the 0 to 160 psi range during sustained operation. Accuracy remains within the stated +/- 3.00 percent without the damping variation seen in liquid-filled alternatives. The fixed centre back connection ensures a stable mount throughout extended use.

Highlights

  • Accurate readings up to 160 psi with ±3.00 % precision
  • 2 in white dial gives clear visibility at a glance
  • 1/8 in NPT centre-back mount fits standard pressure-washer ports
  • Brass socket and bourdon-tube sensor resist corrosion in wet environments
  • Polycarbonate lens and plastic case withstand outdoor knocks and weather

Specifications

BrandARO

Questions about this item

What fitting does my pressure washer need to accept the 1/8 in NPT center-back connection on this gauge?

Your pressure washer must provide a female 1/8 in NPT port so the gauge's male brass socket can thread directly into it.

Will the +/- 3.00 percent accuracy of this ARO 104500 gauge still be reliable if I keep using my older pump and hose?

Yes, the gauge's rated accuracy is independent of pump age; it will read system pressure within +/- 3.00 percent as long as the connection is leak-free.

How can I confirm the gauge is working correctly once installed?

Pressurise the system and verify the needle moves smoothly across the white 0 to 160 psi dial and returns to zero when pressure is released.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.