Aro
ARO 104104-F04-G Flow Control Valve 1/2 in NPT 200 psi 90 cfm
Regulates compressed-air flow up to 90 cfm at 200 psi through 1/2 in NPT ports with a calibrated adjustment knob
- Precise flow control with calibrated adjustment knob
- 90 cfm capacity supports demanding pneumatic tools
- 200 psi rating handles high-pressure air lines
- 1/2 in NPT ports fit standard fittings
- Glass-reinforced thermoplastic body resists heat to 200 Degrees F
ARO 104104 Flow Control Valve
This ARO 104104-F04-G flow control valve regulates compressed air in pneumatic systems. It suits maintenance engineers and machine builders who need adjustable flow control on a 1/2 in NPT line. The calibrated adjustment knob allows repeatable setting of air flow. The valve handles up to 200 psi and 90 cfm.
Glass-reinforced thermoplastic body
The glass reinforced thermoplastic body resists corrosion while zinc plated steel pipe port inserts provide durable threads. Inlet and outlet ports are both 1/2 in NPT for inline installation. Maximum operating temperature reaches 200 degrees F. The valve needs clean, dry compressed air and standard thread sealant for assembly.
Upgrades basic needle valves without calibration
This unit replaces uncalibrated needle valves where operators cannot return to a previous flow setting. The calibrated knob makes the jump worthwhile when process repeatability matters. It is not for applications requiring electronic control or pressures above 200 psi. Buyers needing bidirectional flow control or manifold mounting should consider other valve types.
Highlights
- Precise flow control with calibrated adjustment knob
- 90 cfm capacity supports demanding pneumatic tools
- 200 psi rating handles high-pressure air lines
- 1/2 in NPT ports fit standard fittings
- Glass-reinforced thermoplastic body resists heat to 200 Degrees F
Specifications
| Brand | ARO |
|---|
Questions about this item
At what pressure does the 90 cfm flow rating apply for the 104104-F04-G?
The valve is rated for a maximum pressure of 200 psi and a maximum flow of 90 cfm.
How hot does the glass reinforced thermoplastic body get during continuous pneumatic operation?
The valve is rated for a maximum operating temperature of 200 Degrees F.
Which pipe thread standard do I need on my existing air lines to connect this 1/2 in NPT valve?
The inlet and outlet ports use 1/2 in NPT threads with zinc plated steel inserts.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
