Aro
Aro 104104-F03-G Flow Control Valve 3/8 NPT 58 cfm 200 psi
A flow control valve with a calibrated adjustment knob, 3/8 NPT ports, 58 cfm capacity and 200 psi rating
- Precise flow control with calibrated adjustment knob
- Handles 58 cfm for high-volume pneumatic tools
- 200 psi rating suits demanding compressed-air systems
- 3/8 NPT ports connect directly to standard fittings
- Glass-reinforced thermoplastic body resists heat to 200 Degrees F
ARO 104104-F03-G Flow Control Valve
The ARO 104104-F03-G is a flow control valve built for pneumatic systems that need adjustable air regulation. It suits technicians and maintenance teams setting up or servicing compressed-air lines in workshops or industrial plants.
Installation Notes
The valve connects via 3/8 in NPT inlet and outlet ports using standard pipe fittings and thread sealant. The calibrated adjustment knob allows precise flow setting once the line is pressurised. Overtightening the port inserts can damage the glass reinforced thermoplastic body, so apply only moderate torque. Ensure the flow direction matches the single controlled direction marked on the valve.
Practical Limits
Maximum operating pressure is 200 psi and the flow capacity reaches 58 cfm. The glass reinforced thermoplastic body handles temperatures up to 200 Degrees F. The zinc plated steel pipe port inserts resist corrosion in typical shop air. This valve controls flow in one direction only and is not suited for bi-directional regulation or pressures above the rated limit.
Highlights
- Precise flow control with calibrated adjustment knob
- Handles 58 cfm for high-volume pneumatic tools
- 200 psi rating suits demanding compressed-air systems
- 3/8 NPT ports connect directly to standard fittings
- Glass-reinforced thermoplastic body resists heat to 200 Degrees F
Specifications
| Brand | ARO |
|---|
Questions about this item
How can I confirm the Aro 104104-F03-G valve is operating correctly after installation?
Verify smooth airflow regulation through the 3/8 NPT ports, check that the calibrated adjustment knob moves freely, and ensure system pressure stays within the 200 psi rating during operation.
What components come with the Aro 104104-F03-G flow control valve and what must be purchased separately?
The valve includes a glass reinforced thermoplastic body with zinc plated steel pipe port inserts and a calibrated adjustment knob. Thread sealant and 3/8 NPT fittings for connection are not included.
Which version of the Aro 104104-F03-G should I select for a system requiring 58 cfm at 200 psi?
The 104104-F03-G model is rated for 58 cfm maximum flow and 200 psi maximum pressure, matching those requirements. Confirm the 3/8 NPT port size suits your piping before ordering.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
