Armor Protective Packaging
Armor Protective Packaging VCI Bags 24 x 18 in 4 mil Blue PK 250
Corrosion-inhibiting VCI bags measure 24 by 18 inches, 4 mil thick, and come in a case pack of 250
- TypeWheelbarrows & Carts
- VCI technology inhibits corrosion on metal parts
- Low-density polyethylene construction resists tears and punctures
- Gusseted bottom expands to hold bulky items
- 4 mil thickness provides reliable barrier protection
- Pack of 250 bags supplies high-volume needs
Corrosion-Inhibiting VCI Bags
These blue low-density polyethylene bags use volatile corrosion inhibitor technology to protect metal parts from rust during storage or shipping. Each gusseted open-end bag measures 24 inches by 18 inches with a 4 mil thickness. The case pack contains 250 bags suited for industrial and workshop use.
Upgrade From Basic Poly Bags
Standard polyethylene bags lack active corrosion protection, leaving metal surfaces vulnerable to moisture and oxidation. Switching to VCI bags is worth it when storing ferrous or non-ferrous components for extended periods or through humid conditions. The inhibitor vapor fills the enclosed space and condenses on metal surfaces without coatings or oils.
Check Bag Dimensions And Closure Needs
Verify that the 24 by 18 inch size fits the parts you plan to protect and that an open-end design matches your sealing method. These bags have no built-in closure so heat sealing, twist ties or tape are required. Confirm that low-density polyethylene is compatible with your handling equipment and storage environment.
Highlights
- VCI technology inhibits corrosion on metal parts
- Low-density polyethylene construction resists tears and punctures
- Gusseted bottom expands to hold bulky items
- 4 mil thickness provides reliable barrier protection
- Pack of 250 bags supplies high-volume needs
Specifications
| Brand | ARMOR POLY |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
What are the exact bag dimensions for fitting parts inside?
Each bag measures 24 in by 18 in with a gusseted bottom that expands for bulkier items.
How do I seal these open-end VCI bags after loading?
Heat-seal, tape, twist-tie or fold the open top — no closure is built in, so choose a method that fully closes the bag to keep vapour corrosion inhibitor inside.
When should I replace a bag that has been in storage?
Replace if the blue LDPE film shows tears, punctures or heavy creasing that breaks the 4 mil barrier, because the VCI chemistry only works while the bag stays intact.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
