We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

ARENTI

ARENTI SFP+ to RJ45 Adapter 10G/5G/2.5G/1G Pack of 2

SKU CH-6RFR-7VP95

Two SFP+ to RJ45 adapters auto-sense 10G, 5G, 2.5G and 1G over Cat6a or Cat7 cable

  • Auto-senses 10G, 5G, 2.5G and 1G links
  • Draws under 2.5 W for cooler switch bays
  • Runs reliably from -10 °C to 70 °C
  • Hot-swappable with no driver installation needed
  • Works with Cisco, Ubiquiti, Netgear and other major brands

SFP+ RJ45 10GbE Copper Pair

Two hot-swappable SFP+ transceivers convert a 10 Gbps SFP+ port to an RJ-45 copper link. They auto-negotiate at 10 G, 5 G, 2.5 G or 1 G and draw less than 2.5 W each. The modules ship as a matched pair for link upgrades or spare inventory.

Check Switch Vendor List Before Buying

Compatibility is limited to the vendors listed in the specifications. The adapters will not work with HP ProCurve, H3C, Aruba, Arista, Mellanox, Dell Force10, Extreme, Brocade, Juniper or the Ubiquiti US-48-500W switch. Verify your switch model appears on the supported list before ordering.

Low Heat Silent Operation

Each transceiver consumes under 2.5 W and is rated for continuous use from -10 °C to 70 °C. The metal enclosure shields against electromagnetic interference in dense racks. No fan is present, so the modules add no audible noise to the network cabinet.

Highlights

  • Auto-senses 10G, 5G, 2.5G and 1G links
  • Draws under 2.5 W for cooler switch bays
  • Runs reliably from -10 °C to 70 °C
  • Hot-swappable with no driver installation needed
  • Works with Cisco, Ubiquiti, Netgear and other major brands

Specifications

No published specifications for this item yet.

Questions about this item

What comes in the pack and do I need to buy cables separately?

The pack contains two SFP+ to RJ45 adapter modules. You will need to provide your own CAT.6a or CAT7 patch cables to connect to the RJ-45 ports.

Which speed should I expect on a 50-metre Cat6a run?

At 50 metres the link will negotiate at 2.5 Gbps or 1 Gbps because 10 Gbps and 5 Gbps are only supported up to 30 metres.

What does the 10 Gbps rating mean once the module is installed in my switch?

It means the module can pass 10 Gbps traffic when the link is 30 metres or shorter on Cat6a or Cat7 cable; longer runs automatically drop to lower speeds.

New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.