ARENTI
ARENTI 2 in 1 Accessory Fischer 3 Pin Male to Female Power Cable 50cm
Fischer 3-pin male-to-female cable delivers 12 V or 24 V power plus run/stop control to ARRI and Red camera accessories over 50 cm
- Powers ARRI wireless video gear from camera RS ports
- Fischer 3-pin male to female carries power and run/stop
- 50 cm length keeps rig tidy on set
- Tested compatible with major-brand camera systems
- New cable ready for professional production use
Purpose-built camera power link
This Fischer 3-pin male-to-female cable delivers 12 V or 24 V power plus run/stop signalling to ARRI UMC-4, WVR-1, WVT-1, Cmotion Cvolution and Camin accessories from an Alexa or Red DSMC2 RS port. The 50 cm length keeps rigs tidy on gimbals or shoulder mounts.
Replaces loose adapters and long runs
Swap out jury-rigged jumper wires or oversized cables that snag on matte boxes; the jump is worth it when you need a clean, locking connection that carries both power and trigger signals in one short run.
Check port gender and voltage before ordering
Confirm your camera RS output is a Fischer 3-pin female and the accessory input is a matching male; verify the accessory accepts 12 V or 24 V so the cable’s pass-through rating matches your rig.
Highlights
- Powers ARRI wireless video gear from camera RS ports
- Fischer 3-pin male to female carries power and run/stop
- 50 cm length keeps rig tidy on set
- Tested compatible with major-brand camera systems
- New cable ready for professional production use
Specifications
No published specifications for this item yet.
Questions about this item
What Fischer connector size does the male plug on this 50 cm cable use?
The male end is a Fischer 3 pin connector that fits the RS 12 V or 24 V output port on ARRI Alexa, RED DSMC2 and compatible camera bodies.
Which orientation must the Fischer 3 pin male be inserted to engage the run/stop function?
Align the keyway on the male plug with the slot on the camera RS port, push straight in until the latch clicks, then secure the female end to the accessory — reversing the plugs breaks the run/stop circuit.
When should the 19.7 inch cable be replaced if the locking collar becomes loose?
Replace the cable once the Fischer collar no longer holds the pins firmly or if intermittent power causes the WVT-1, WVR-1, UMC-4 or Cmotion Cvolution Camin to drop out during operation.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
