ARCTIC
ARCTIC Freezer 8i 2 in 1 accessory Intel LGA1851 LGA1700 100 mm PWM fan
Compact Intel LGA1851 and LGA1700 CPU cooler with a 100 mm PWM fan, hydrodynamic bearing and pre-applied MX-6 thermal compound
- Ready for Intel LGA1851 and LGA1700 sockets
- Contact frame spreads pressure for longer CPU life
- Low-profile build fits compact cases and tall RAM
- Hydrodynamic sleeve bearing keeps fan quiet at all speeds
- Pre-applied MX-6 paste enables instant installation
Intel LGA1851 and LGA1700 compatibility
The ARCTIC Freezer 8i is a compact CPU cooler designed for Intel LGA1851 and LGA1700 sockets. It ships with only the Intel mounting hardware to reduce packaging waste. A 100 mm PWM fan with a hydrodynamic sleeve bearing provides quiet airflow. Pre-applied MX-6 thermal compound allows immediate installation without extra paste.
Check socket and case height before ordering
Verify that your motherboard uses an Intel LGA1851 or LGA1700 socket, as no AMD mounting hardware is included. Ensure the case has enough vertical clearance for the cooler’s low-profile design. Confirm that the motherboard CPU fan header supports PWM control for automatic speed regulation. High RAM modules should fit, but measure if using unusually tall kits.
Low-profile build with contact frame
The cooler uses a contact frame to distribute pressure evenly across the CPU heatspreader for consistent heat transfer. Its reduced height suits compact chassis and avoids interference with nearby components. The hydrodynamic sleeve bearing keeps fan noise low at varying speeds. MX-6 compound is already spread on the base, so the cooler is ready to mount straight from the box.
Highlights
- Ready for Intel LGA1851 and LGA1700 sockets
- Contact frame spreads pressure for longer CPU life
- Low-profile build fits compact cases and tall RAM
- Hydrodynamic sleeve bearing keeps fan quiet at all speeds
- Pre-applied MX-6 paste enables instant installation
Specifications
No published specifications for this item yet.
Questions about this item
What is included in the box and what must be purchased separately?
The box contains the Freezer 8i cooler with a 100 mm PWM fan, pre-applied MX-6 thermal compound, and mounting hardware for Intel LGA1851 and LGA1700 sockets. No additional parts are needed for those platforms.
Which socket version should I choose for my Intel processor?
The cooler supports both LGA1851 and LGA1700 out of the box; select the mounting kit that matches your motherboard socket.
What does the 100 mm PWM fan deliver in a real build?
The hydrodynamic sleeve bearing keeps the 100 mm PWM fan quiet at low speeds and under changing loads, while the compact height clears tall RAM and fits small cases.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
