We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow PTFE gas line tape roll, half-inch by 260 inches

Aqua Plumb

Aqua Plumb 3127Y 1/2" x 260" Yellow PTFE Gas Line Tape

SKU CH-XRP8-FTC33

Yellow PTFE tape seals gas-line threads up to 10,000 PSI from -450°F to 550°F

  • TypeDrain Components
  • Selling UnitEach
  • Seals gas lines reliably with yellow PTFE tape
  • 260 inch roll covers many threaded connections
  • Withstands 10,000 PSI for high-pressure systems
  • Handles -450°F to 550°F temperature range
  • Suitable for natural gas, propane, butane, water, oil, chemicals

Gas-line PTFE tape for threaded connections

Yellow PTFE gas line tape seals threaded joints in natural gas, propane, butane, water, oil and chemical systems. The 1/2-inch by 260-inch roll suits both ferrous and non-ferrous fittings in pipelines, cylinders and containers. It is intended for installers who need a single tape approved for multiple fluid types.

Fits standard 1/2-inch pipe threads without extra

Wrap the tape directly onto male threads before assembly; no separate pipe dope or compound is required. The roll length provides enough material for multiple connections, freeing the installer from keeping several specialised sealants on the vehicle. Each joint is sealed with one product regardless of the medium carried.

Withstands 10,000 PSI

The tape maintains its seal across the full rated pressure and temperature range during continuous service. It does not degrade or extrude under sustained high-pressure gas loads or prolonged exposure to extreme cold and heat. Installers can rely on consistent performance throughout the system's operating life.

Highlights

  • Seals gas lines reliably with yellow PTFE tape
  • 260 inch roll covers many threaded connections
  • Withstands 10,000 PSI for high-pressure systems
  • Handles -450°F to 550°F temperature range
  • Suitable for natural gas, propane, butane, water, oil, chemicals

Specifications

TypeDrain Components
Selling UnitEach

Questions about this item

Will the 10,000 PSI pressure rating hold on a natural gas line that runs continuously?

The tape is rated for up to 10,000 PSI and temperatures from -450° to 550°F, so it maintains its seal under sustained pressure on natural gas, propane, butane, water, oil or chemical lines.

Does the yellow PTFE tape degrade or get hot when left on a gas fitting all day?

PTFE is chemically inert and the tape withstands -450° to 550°F, so it does not degrade, generate heat or produce noise during continuous service.

Do I need a specific thread size or pipe dope to use this 1/2" x 260" roll?

The 1/2" wide by 260" long roll works on any threaded ferrous or non-ferrous fitting; no pipe dope or other sealant is required — just wrap the threads and assemble.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.