We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal tubular heating element with bent terminals, silver finish, new condition

Appliance Factory Parts

Appliance Factory Parts 62101210 Heater 3.4 kW 230V Appliance Part

SKU CH-70QH-X7EKR

Genuine Friedrich 3.4 kW 230 V heater element fits 42 listed air-conditioner models

  • Selling UnitEach
  • TypeAppliances
  • Genuine Friedrich part ensures exact fit
  • 4 kW 230 V heater delivers rated output
  • Compatible with 42 Friedrich AC models
  • Direct replacement for part 62101210
  • New condition guarantees full service life

Genuine Friedrich Heater 3.4 kW 230V

This genuine Friedrich heater assembly delivers 3.4 kW of heating power at 230 V for compatible air-conditioning units. It replaces part number 62101210 and fits 42 listed Friedrich models including WY09A33FA, WE10B33A-B and WS10B33A-C. Buyers needing a different voltage or wattage rating cannot use this part.

Thermal performance and power draw

Rated at 3.4 kW, the element converts electrical input directly into heat for the conditioned space. Normal operation draws the full rated current at 230 V, so the supply circuit must support that load. No additional cooling or airflow requirements beyond the host unit's design are specified.

Behaviour under sustained load

During continuous heating cycles the element maintains its 3.4 kW output as long as the host unit calls for heat. Duty cycle and maximum run time are governed by the host appliance's controls, not by the heater itself. Installers should verify the host unit's thermal limits before extended operation.

Highlights

  • Genuine Friedrich part ensures exact fit
  • 4 kW 230 V heater delivers rated output
  • Compatible with 42 Friedrich AC models
  • Direct replacement for part 62101210
  • New condition guarantees full service life

Specifications

BrandAppliance Factory Parts
Selling UnitEach
Part Number62101210
TypeAppliances

Questions about this item

How do I install the 3.4 kW 230V heater in my Friedrich AC, and what step is commonly missed?

Disconnect power, remove the old heater assembly, fit the genuine Friedrich 62101210 element into the housing, reconnect the wiring harness securely, and verify the thermal cut-out is seated correctly — the step most often missed is re-engaging the safety limit switch clip.

What maintenance or replacement will the 3.4 kW heater need over time?

The heating coil itself requires no routine servicing; plan to inspect the terminal connections and ceramic insulators annually and replace the element if resistance drifts from specification or if the high-limit trips repeatedly.

What limit appears first when the 3.4 kW heater runs continuously?

The built-in high-limit thermostat opens at its factory-set temperature, cutting power to the 3.4 kW coil before the element or wiring can overheat.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.