Apollo
Apollo 94A10101 Manual 2-Way Ball Valve 1/4 in FNPT Full Port
A manual two-way brass ball valve with a full-port chrome-plated brass ball rated for 600 psi operating pressure
- Full-port design maximises flow capacity
- Brass body resists corrosion in gas service
- Chrome-plated ball ensures smooth operation
- 600 psi rating handles high-pressure lines
- Non-locking handle allows quick manual control
Apollo 94A10101 Manual 2-Way Ball Valve
This Apollo 94A10101 is a manual two-way ball valve built with a brass body and chrome-plated brass ball. It serves technicians and installers who need a full-port shut-off for combustible gases in compressed-air or vacuum systems. The straight, two-piece construction provides a reliable flow path in a compact 1/4 in FNPT package.
Brass body with full-port chrome-plated ball
The valve connects via 1/4 in FNPT threads on both ends, fitting directly into existing piping without adapters. Its full-port design removes flow restriction, freeing up system capacity compared to reduced-port alternatives. Rated for 600 psi operating pressure, it handles demanding pneumatic lines while the non-locking handle allows quick manual operation.
Replaces restricted or lower-pressure valves
Upgrading to this model makes sense when a current valve limits flow or lacks the 600 psi rating required by the application. The jump is worth it for installations needing full-port throughput and brass construction compatible with combustible gases. It does not suit systems requiring locking handles, steam ratings, or 3-A sanitary compliance.
Highlights
- Full-port design maximises flow capacity
- Brass body resists corrosion in gas service
- Chrome-plated ball ensures smooth operation
- 600 psi rating handles high-pressure lines
- Non-locking handle allows quick manual control
Specifications
| Brand | APOLLO VALVES |
|---|
Questions about this item
How long will the brass body hold up at the 600 psi operating limit under continuous cycling?
The brass body and chrome-plated brass ball are rated for a maximum operating pressure of 600 psi, so sustained use at or below that pressure stays within the design limit.
Does the valve generate noticeable heat or vibration when left open all day on a compressor line?
As a passive manual ball valve with no moving actuators, it adds no heat or vibration of its own; only the flowing media temperature reaches the brass body.
What thread sealant or fittings do I need to connect this 1/4 in FNPT valve to my existing piping?
The valve has 1/4 in FNPT ends, so you will need matching 1/4 in MNPT nipples or adapters plus thread sealant approved for combustible gases.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
