We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass inline ball valve with press connections and lever handle

Apollo

Apollo 77W10401A Ball Valve 3/4" Press Brass

SKU CH-N6JV-M704V

Brass inline ball valve with press connection, full-port flow and 300 psi CWP rating for 250 °F service

  • Full-port design maximises flow through 3/4 in pipe
  • Press connection enables fast, flameless installation on site
  • 300 psi CWP rating handles demanding water-service pressures
  • Blowout-proof stem prevents stem ejection under pressure
  • Chrome-plated brass ball with RPTFE seats resists corrosion

Apollo 77W10401A Ball Valve 3/4" Press Brass

This Apollo 77W10401A is a full-port ball valve built with a brass body and chrome-plated brass ball. It uses a press connection for 3/4 inch pipe and includes a blowout-proof stem with a lever handle. The valve is rated for 300 psi CWP and 15 psi WSP across a temperature range of 0 to 250 degrees F.

Ideal for Press-Fit Copper Systems

The press connection suits installers working with copper press fittings who need a reliable inline shut-off. It is not suited for threaded, soldered or push-fit piping systems. Buyers needing a different pipe size, connection type or higher steam pressure rating should look at other valve configurations.

Fits 3/4 Inch Press Lines Directly

The valve slides onto 3/4 inch copper tube prepared for press fittings, eliminating the need for threading or soldering equipment. Its full-port design maintains flow capacity through the line. The Buna-N body seal and RPTFE seats handle water and low-pressure steam within the stated limits.

Highlights

  • Full-port design maximises flow through 3/4 in pipe
  • Press connection enables fast, flameless installation on site
  • 300 psi CWP rating handles demanding water-service pressures
  • Blowout-proof stem prevents stem ejection under pressure
  • Chrome-plated brass ball with RPTFE seats resists corrosion

Specifications

BrandAPOLLO

Questions about this item

What pipe size and connection type must my existing plumbing have to fit this 3/4" press valve?

Your plumbing must be 3/4 inch pipe with press-ready ends so the valve can be pressed directly onto the tube without threading or soldering.

Will the 300 psi CWP rating and Buna-N body seal handle the same pressures and temperatures as my older brass valves?

The valve is rated for 300 psi cold working pressure and 15 psi steam, with a temperature range of 0 to 250 degrees F, so it matches or exceeds typical residential and light commercial brass valve limits.

How can I verify the blowout-proof stem and full-port ball are functioning correctly after pressing the valve into the line?

Pressurise the system to working pressure, then cycle the lever handle from fully closed to fully open; smooth operation with no stem movement and no leakage at the body seal confirms correct function.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.